Jeremy
DuePrint Complete Wiring Diagram.pdfWiring Diagram with all of the most important connections broken out on the Duet 2 WIFI and Duex5 boards. Refer to Duet3D's website for complete wiring diagrams for the Duet 2 WIFI and DueX5 boards. https://duet3d.dozuki.com/Wiki/Duet_Wiring_Diagrams https://duet3d.dozuki.com/Wiki/Duex_wiring_diagramsAdobe Portable Document Format - 477.16 kB - 10/22/2022 at 20:35 |
|
|
DuePrint Wiring Directions.docxUpdated Wiring Directions for connecting the Duet 2 wifi, DueX5 and Geckodrive G320X servo motor driver to the PDB of the 3D printer.document - 15.59 kB - 10/22/2022 at 19:49 |
|
|
DuePrint Bill of Materials.xlsxBill of Materialssheet - 20.97 kB - 10/13/2022 at 21:45 |
|
|
DuePrintPrusaSlicerSettings.zipPrint Settings for the DuePrint for PrusaSlicer 2.5x-zip-compressed - 5.08 kB - 07/22/2022 at 22:13 |
|
|
config.gUpdated config with notations on what pins to connect on the Duex and Uprint PDB (Power Distribution Board).g - 10.75 kB - 07/21/2022 at 17:28 |
|
|
DuePrintSettings.zipDuePrint Duet3D DWC settings, macros, and some initial accelerometer test results.x-zip-compressed - 2.86 MB - 07/21/2022 at 15:57 |
|
|
PXL_20220720_220146326.mp4Door lock control and removable glass bedMPEG-4 Video - 45.18 MB - 07/21/2022 at 15:41 |
|
|
PXL_20220720_220417580.mp4LED remote chamber light controlMPEG-4 Video - 23.25 MB - 07/21/2022 at 15:40 |
|
|
PXL_20220721_032201178.mp4Video showing printer acceleration limited with a print speed setting of 300 mm/sMPEG-4 Video - 11.37 MB - 07/21/2022 at 15:33 |
|
|
PXL_20220314_115147488.mp4Earlier testing showing tool change, extruder heating, and first layer printing. The filament is black and impossible to see in this video.MPEG-4 Video - 43.63 MB - 07/20/2022 at 16:10 |
|
|
PXL_20220720_115103647.LS.mp4Printing with Hatchbox ABS red.MPEG-4 Video - 45.39 MB - 07/20/2022 at 15:15 |
|
|
PXL_20220720_023105850.LS.mp4Demo print. 0.2 mm layer height, 300C hotend temp, 70C chamber temp.MPEG-4 Video - 46.40 MB - 07/20/2022 at 15:15 |
|
|
DuePrint
This is a Stratasys Uprint SE+ 100 percent reversible, open source retrofit controlled by a Duet3D Duet 2 wifi, DueX5 and Geckodrive G320X.