Projects Ali Jani likes and follows

Sort by:

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

bryan-howard Bryan Howard

open hardware 2 GHz to 13 GHz two-port vector network analyzer

Vector Network Analyzer

jon-klein Jon Klein

Hackaday Prize 2019

The Arduino Nano Quick Project. Develop Everywhere.

Arduino Nano QP

alain-mauer Alain Mauer

Build an Arduino Home Automation System that can control electrical devices like lights, fans, garage doors etc using our mobile phone.

Home Automation Step by Step using Wemos D1 Mini w

jithin-sanal Jithin Sanal

The 2018 Hackaday Prize

Model and 3D print a mold to create a silicone rubber "skin" lattice for an easy to make custom prosthetic hand that matches your 3D scan

3D Scan to Custom Soft Prosthetic Hand

curt-white Curt White

For everyone who wants to develop ATtiny10 on Arduino IDE

ATtiny10 Dev Environment on Arduino IDE

kimio-kosaka Kimio Kosaka

How you can get multi-connect and remote access to USB Dongle

Donglify - Share USB Key Software

An 8-bit TTL computer with 8 bits of address space.

Boxer-1 TTL Computer

The 2017 Hackaday Prize

Quickly identify radioactive materials with a pocket-sized ion chamber. Built from standard parts for easy manufacture and low cost.

Open Radiation Detector

carlos-garcia-saura Carlos Garcia Saura

A Fully 3D Printed Arduino Robot Arm for STEM Education

LittleArm 2C: 3D Printed Robot Arm

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

I live in a rented flat and didn't want to shell out ~£200 for a Nest thermostat, so I decided to build my own.

Smart IOT thermostat

a cost $1, actually even less, solution for Bluetooth 4.1

<$1 Bluetooth 4.1 Solution

This article summarizes how to connect your ESP32 WiFi module to the AskSensors IoT cloud

How to connect ESP32 to the IoT cloud

In this project I reverse engineer the interface of my BMW CD changer and replace it by my own Bluetooth PCB to play music from my phone :).

Bluetooth CD Changer Emulator

The Icarus is a FeatherWing-compatible (Feather) board with the nRF9160, made for easy cellular IoT development.

Icarus IoT Dev Board nRF9160 (LTE-M, NB-IoT, GPS)

This workshop is focused on reverse engineering and utilizing hardware-level debuggers.

Remoticon: The Hackers Guide to Hardware Debugging

I got a Prusa MK3s printer kit, assembled it, and it worked the first time.

Prusa MK3s Build - my first 3D printing experiance

patrick Patrick

Arduino based high voltage parallel programmer for AVR microcontrollers

AVR High Voltage Programmer 2

dilshan-jayakody Dilshan Jayakody

Smart Agriculture IoT Gateway supports CAN, RS485, Lora, Zigbee, GSM/GPS, Input and Output control

Smart Agriculture IoT Gateway

thuan-le Thuan Le

Hackaday Prize 2020

'No limits' to what you can control with javascript web apps, the rest is done for you by node.js and python services

raspi iot