Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Mirko likes and follows

123.6k
1,628k
2.6k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

12.8k
7.4k
14
A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.
Project Owner Contributor

Monoprice Mini 3D Printer Bed Upgrade

dave-whiteDave White

26k
6.4k
255
Blackbox shifts 3D printing towards a multitool manufacturing robot.
Project Owner Contributor

Multitool 3D Printer - Blackbox

marc-schmannMarc Schömann

  • oshpark
7.2k
6.4k
43
Wristwatch form-factor conference badge
Project Owner Contributor

Open Hardware Summit 2020 badge

oshparkoshpark

11.9k
6.1k
33
4 Digit Nixie Clock driven by Raspberry Pi Zero and Arduinix board.
Project Owner Contributor

Raspberry Pi Zero Nixie Clock

maksim-surguyMaksim Surguy

9.7k
4.9k
78
Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.
Project Owner Contributor

Sigmoid S7P 3D Printer Control Board

pkelectronicspkElectronics

4.1k
3.7k
24
Slide this Japanese style hand plane along any rough corners to give them a clean chamfer (AKA beveled edge). Uses a standard razor blade.
Project Owner Contributor

3D Printed Chamfer Tool

alex-richAlex Rich

10k
2.6k
30
A DIY polishing station to smoothen 3d-printed parts built using Arduino and portable humidifier.
Project Owner Contributor

DIY Polishing Station for 3d-printed Parts

chizchiz

11k
1.1k
22
Use a Raspberry Pi to build an EV charging station
Project Owner Contributor

Raspberry Pi EVSE Hat

nick-sayerNick Sayer

1.1k
973
11
A retrocomputer and CPU exerciser for classic 8-bit CPUs.
Project Owner Contributor

SDC_One

gbmgbm

166.5k
637
616
Full-on Spotify scrolling and streaming via a Raspberry Pi Zero W and the original iPod clickwheel. Bluetooth, WiFi, and haptic feedback!!
Project Owner Contributor

sPot: Spotify in a 4th-gen iPod (2004)

guy-dupontGuy Dupont

17.8k
101
99
A very minimal design to break out some common peripherals of the CM4. More a quick demonstration than anything else.
Project Owner Contributor

Minimal Raspberry Pi CM4 and 5 Carrier

timonskutimonsku

12.9k
58
45
This is clone of the Odroid Go game device with upgrades
Project Owner Contributor

ESP32 Game Console

miroslav-zuzelkaMiroslav Zuzelka

5.6k
26
25
Single layer breakout board for the RPI CM. Mostly a learning exercise for myself.
Project Owner Contributor

Crappy Raspberry Pi Compute Module Breakout

timonskutimonsku

2k
24
19
A OSHW Raspberry Pi CM4 carrier board in Arduino/Metro formfactor for electronics prototyping
Project Owner Contributor

Piunora

timonskutimonsku

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday