Projects Tom Goff likes and follows

Sort by:

Official Hackaday Prize Entry

A home automation solution that utilizes a Raspberry Pi server, 433MHz radios, and an Android app.

Low Cost Home Automation

daniel-hankewycz Daniel Hankewycz

The 2018 Hackaday Prize

Make & 3D print your own phone with sensors, displays, electronics, batteries and antennas. Customize Android and do exactly your thing!

Kite : Open Hardware Android Smartphone

shree-kumar Shree Kumar

A fully hardware debounced rotary encoder.

Hardware Debounced Rotary Encoder

This solution has a number of unique benefits, a sensor platform with webserver, powered over Ethernet, accessible and programmed by browser

IoT Ethernet Sensor using Power over Ethernet

Build an Arduino Home Automation System that can control electrical devices like lights, fans, garage doors etc using our mobile phone.

Home Automation Step by Step using Wemos D1 Mini w

jithin-sanal Jithin Sanal

AVR ATMEGA8A Programmong

AVR programming using MS Visual studio code

scalable hardware for neural network system

NSCE-ngbrain

uGFX was written for use with makefiles. Using it in arduino is possible with minimal effort, though. Here's how.

using uGFX in Arduino

The 2016 Hackaday Prize

Toolchain to start making your environments connected in a single cloud

Multisite Home/Office/Hackerspace Automation

joshua-conway Joshua Conway

Commander un relais iot avec ESP-01 via SmartThings

Relais ESP-01 iot sur SmartThings

erik-tellier Erik Tellier

A Arduino alarm clock utilizing the RTC module DS3231.

Arduino Alarm Clock

nat-souza Natã Souza

Modify your gas furnace thermostat and electric hot water heater controls and save $750 per year

Home Automation with NodeMCU

nodemcu12ecanada

The 2017 Hackaday Prize

Sub 1GHZ RF wireless modules operating at 915MHZ and 433MHZ ISM bands, based on the ADF7023, full open source!

S1G RF: Sub 1GHZ Radio Modules 915MHZ and 433MHZ

Powered from the 24v control circuit of a garage door opener. It can control the door and sense if the door is open/closed

Wi-Fi Garage Door Opener For Home Automation

This adds an extra layer of security against microphone attacks by allowing the user to ground out the data line shared by the microphones.

Echo Dot Hardware Microphone Mute Modification

andrew-peters Andrew Peters

Adding bluetooth to an old broken FM Radio

Retrofitting of an old FM Philips Radio

giulio-pons Giulio Pons

This is a simple Arduino shield for Nimbelink Skywire cellular modems. They all have the same pinout, so the modems are interchangeable.

Arduino Shield for CAT M1 and NB-IoT Modems

nootropic-design nootropic design

Provides automation for a Fermax 4 + N Electronic Door Entry System

Northcliff Home Automation Door Intercom Monitor

I am investigating the use of ADCs (analog to digital converters) at Msps and Gsps, for global gravity and radio networks.

Software Defined Radio Notes

richard-k-collins Richard K Collins

Let's Interface the Sharp GP2Y1014AU0F Sensor with Arduino to estimate the Dust Density in Air.

Interfacing GP2Y1014AU0F Sensor with Arduino

hiotron hIOTron

Goal of the project is to develop and build a homebrew 16 bit relay computer

Homebrew 16 bit relay computer