Projects Douglas likes and follows

Sort by:

Using a terminal from 1976 as home automation hub. Because we can.

ADM-3A Dumb Terminal Home Automation Hub

daniel-karpantschof Daniel Karpantschof

Driving controller-less graphics LCD with Arduino

Arduino CLGLCD

Got printer? Connect to the motors with a Pi, plonk in a cheap scope, and do 2D and 3D scans!

LadyBug BEEFY: 3D printer motorized microscope

ahron-wayne Ahron Wayne

Hackaday Prize 2019

Convert FPV racing drone into an interceptor using Raspberry Pi

Open Source Air Defense

Supplyframe DesignLab: 2022 Hackada…

Wireless USB dongle (868MHz) for home automation to improve the indoor air quality (IAQ)

Fresh air automation by RF usb dongle

The 2017 Hackaday Prize

An affordable modular platform for open robotics development for hackers. Provides a jump start to build your own robot.

MORPH : Modular Open Robotics Platform for Hackers

roald-lemmens Roald Lemmens

Quick way to start with MCUs

Adventures with a STC89C52 development board

ken-yap Ken Yap

The 2018 Hackaday Prize

A drum machine, base synth and arpeggiator that fits in your pocket. User interface inspired by classic mod tracker software.

FATCAT: Altoids Tin Mod Tracker

Fully open source remote control for common electric skateboards using the NRF24L01+

Open esk8 Remote - v1

timo-birnschein Timo Birnschein

We are going to create an AC Voltage Measuring Device using Arduino, which will estimate the voltage of Alternating Current.

AC Voltmeter using Arduino

hiotron hIOTron

Hackaday Prize 2020

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

Open Exosuit for Differently Abled

alex-m-sunny Alex M Sunny

I found myself being intrigued with the low level safety features of my X201. I experimented with the I2C bus and it got interesting...

Hacking a Supervisor Password - With a Beagle Bone

timo-birnschein Timo Birnschein

Building a sweet little shoulder dragon to accompany my Color Stealing Fairy project.

Nova - A Companion Bot

angela-sheehan Angela Sheehan

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

20 autonomous battery-powered bright LEDs, TouchOSC interface, generative art, Artnet(DMX)/OpenSoundControl support

Radio LED controller

alexander-urbanovich Alexander Urbanovich

The 2018 Hackaday Prize

Following a supercharger mod on my 1990 Corrado, I realized that I needed a unique tube design to ensure proper fit and no preassure leaks

3D Printed Boost Tube Replacement

A coin cell sized coin cell powered ring oscillator with LEDs

SMD Pizza

Inkjets could be used as an FDM Resin 3D printer by replacing the ink by other fluids and adding a Z axis.

Converting Inkjet printers into FDM 3D printers

Make a LoRa based Remote Controller that can control devices from several kilometres away without any Internet through LoRa.

LoRa Based Remote Controller | Control devices

akarshagarwal98

SDR DSP radio with with large touch screen and tunning knob

DIY SDR DSP Radio with Raspberry Pi and RTLSDR

mircemk mircemk

Needed a good workstation

Electronic/Audio/multimedia - Workstation