Projects cristinuts likes and follows

Sort by:

An open-source dual-channel SDR Raspberry Pi HAT with up to 6 GHz tunable range

CaribouLite SDR for RPI

david-michaeli David Michaeli

I found myself being intrigued with the low level safety features of my X201. I experimented with the I2C bus and it got interesting...

Hacking a Supervisor Password - With a Beagle Bone

timo-birnschein Timo Birnschein

Use an ESP32 to receive audio via bluetooth to upcycle an old stereo

ESP32 Bluetooth Audio Receiver

grgory-paul Grégory Paul

PC game to build virtual 3D racetracks in your house then race actual physical drones on them

Mixed Reality Drone Racing

Track lateral and vertical movements of a 3D printer via AprilTags. Then, get informed of malfunctions related to motion via Telegram.

IoT 3D Printer Motion & Status Tracker w/ Telegram

kutluhan-aktar Kutluhan Aktar

Drum / voltage sequencer

Teensy / Arduino eurorack sequencer

lee-sampson Lee Sampson

the component that is so prone to failure on all vr controllers, apparently

Quest2/Quest3 thumbstick teardown and fix

This is an SNTP clock based on the STM32H735 Discovery Kit.

NTP Clock Based on STM32H735 Discovery Kit

dmoisan dmoisan

Air quality sensor systems for urban bodies of water, so that the population can avoid potentially dangerous exposure

2022 HDP 4 - Climate Resilient Communities

supplyframe-designlab Supplyframe DesignLab

USB-PD sink with headers compatible with breadboard. Features a fixed 3.3V supply and one-click voltage selection without incorporating MCUs

Low-cost USB-PD Sink for Breadboard (and More)

Breathing new life into a vintage Philco AM radio by turning into an entertainment system with Alexa and Raspberry Pi at the helm

Modernizing an Antique Radio

jacob-daniels Jacob Daniels

Supplyframe DesignLab: 2022 Hackada…

An audio DSP platform based on the Raspberry Pi RP2040

DS-Pi | RP2040 Audio DSP Board

IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.

IoT Projects using ESP32 Blynk & IR Remote control

Pin Badge and Keychain PCB version of Flux Capacitor with animated LEDs

Flux Capacitor Badge

hojadurdy-durdygylyjov Hojadurdy Durdygylyjov

Heavily inspired by OpenBCI, especially their ganglion board design, but with an ESP32 handling communication/control

ESP32 EEG

Supplyframe DesignLab: 2023 Hackada…

Openthing 2 RepTrap is a detection device and camera trigger for capturing images of relatively small animals, including lizards, frogs etc.

Openthing 2 - RepTrap

All in One STM32 feather board with Radio capabilities (NRF24 and LORA)

Radio Feather X

Calibrate the XY offset of your printer by printing on a piece of paper and scanning it

3D printer XY calibration using a scanner

martijn-schouten Martijn Schouten

Raspberry Pi running Windows versions of Reaper and Valhalla FX in an 8-track tape storage box for spooky Halloween noise goodness!

Spooky Halloween Noise Maker

c-m-herron C. M. Herron

The Dendrite-S3 is a robotics development board powered by the ESP32-S3, featuring an on-board LiPo charge/discharge circuit, and 34 GPIO.

Dendrite-S3 Robot Development Board

holotype-robotics Holotype Robotics

A festive Santa pin commemorating the nascent AI apocalypse!

The Santanator