Projects coleflynn likes and follows

Sort by:

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

he arrival of small satellites that used LoRa for telemetry data has meant that less technically qualified persons, with a very low budget,

Ground station for LoRa satellites

alberto-nunez alberto nunez

A 3D printer for printing with welding wire

Wire 3D Printer

dominik-meffert Dominik Meffert

Supplyframe DesignLab: 2022 Hackada…

Thermionic energy conversion isn't very efficient (it's also nothing new) but they *are* photovoltaic devices you can build with a torch

Glass Tube Solar Thermionic Converters

nick-poole Nick Poole

The 2018 Hackaday Prize

A haptic glove that vibrates when its touches a virtual object. It also tracks physical finger positions and hand orientation.

DIY Haptic Glove for VR

dinithi-silva Dinithi Silva

My experience designing and making a building DIY 3D printer

DIY Silent 3D Printer

luke-brandon Luke Brandon

Step-by-step instruction on running Dropbox on Raspberry Pi using ExaGear Desktop

Run Dropbox on Raspberry Pi

How to generate frequencies below 10Hz using a PC, an amplifier, and a handful of components.

Extreme Low Frequency Signal Generator

joseph-eoff Joseph Eoff

The 2018 Hackaday Prize

The idea is to take Raspberry Pi, current/voltage meter INA219, and visualize the data by the web interface.

Power logger with Raspberry Pi

3020 CNC software problems

CNC VEVOR 3020 software problems

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

Art piece that creates kaleidoscopic colored shadows. Arrays of high-powered LEDs in a circle, pointing at the center.

Colordance Circle

adam-demuri Adam Demuri

Its cool while working with digital circuits in frequency modulation, Gives you flexibility and more features with the custom PCB design.

Arduino based Digital Audio FM Radio using RDA5807

sagar-001 Sagar 001

Making a GoPro like action camera using the Raspberry Pi Zero at the heart of it all

Raspberry Pi Zero Action Camera

Debug Uno/ATmega328P with CH552 debugger in Arduino IDE 2.0.0 with Debug Wire

Debug Arduino Uno / ATmega328P in Arduino IDE 2

J1772 EVSE firmware for ESP32 based devices

esp32-evse

miroslav-dzrik Miroslav Dzúrik

Arduino based FM radio using the Nano and the modules: SSD1306 OLED , TEA5767 FM radio, LM386 audio amplifer and KA2284 Audio level.

Arduino FM radio

I'm making a shoe that allow you to walk around as much as you want in VR while staying in the same spot in real life

Passive Virtual Reality Shoes

finallyfunctional

All in One STM32 feather board with Radio capabilities (NRF24 and LORA)

Radio Feather X

Hackaday Prize 2020

Ground Penetrating Radar using Arduino

GPRino

mirel-paun Mirel Paun

8 Axis Balancing Robot to put the Real in Mixed Reality.

Balancing Trike Robot