Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Dan DWRobotics likes and follows

28.6k
7.8k
199
Micro Smart LiDAR Sensor
Project Owner Contributor

MappyDot

bleckyBlecky

28.3k
2k
355
A quadrupedal walking robot
Project Owner Contributor

Dogbot

charles-galambosCharles Galambos

1.6k
1.5k
7
This is just a hexapod made in a 3d printer to educational and ertertainment pourposes
Project Owner Contributor

3D Printed Hexapod

vincius-jean-ferreiraVinícius Jean Ferreira

1.3k
1.3k
13
To research and experiment with Robotics, AI, Transportation, IoT, Security and Mobility, Healthcare, Education etc
Project Owner Contributor

Robot

anil-pattniAnil Pattni

96.9k
850
606
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
Project Owner Contributor

3D Printed Robot Actuator

paul-gouldPaul Gould

760
695
13
MorningStar's Walking, Talking, Flying and Swimming Oracle
Project Owner Contributor

Pandelphi

morningstarMorning.Star

20.2k
211
139
The first 100% open-source lower-limb robotic exoskeleton.
Project Owner Contributor

ALICE: Robotic Exoskeleton

guillermo-herrera-arcosGuillermo Herrera-Arcos

18.1k
152
123
Boston Dynamics' robot dog, Spot Mini is unavailable at any price. A Chinese copy is $30,000. Cut 99% of the cost and build one at home.
Project Owner Contributor

Mike's Robot Dog

mike-rigsbyMike Rigsby

12.1k
122
118
Put screens on your jewelry.
Project Owner Contributor

Video Pendant

dehipudeʃhipu

8.7k
115
101
A 6cm 4-legged Ball Robot
Project Owner Contributor

4B Robot

carl-bugejaCarl Bugeja

7.8k
95
67
This is Quadbot 17, a work-in-progress quadruped robot with 22 degrees of freedom, based on Robotis AX-12 motors and a 3D-printed chassis.
Project Owner Contributor

Quadruped robot with 22 DoF

dimitris-xydasDimitris Xydas

6.4k
76
53
An open-source robot that helps makers build low-cost robots without having to start from scratch.
Project Owner Contributor

Two Leg Robot

ted-huntingtonTed Huntington

7.8k
53
45
A little rover robot to keep an eye on my prints inspired by the butter passing robot in Rick and Morty.
Project Owner Contributor

Butter Robot

brambram

1.9k
40
35
Robots are caught in a catch-22: need the numbers to be useful, need to be useful to justify the numbers. Open source can overcome this.
Project Owner Contributor

Open Source Android

therobotstudiotherobotstudio

4.4k
36
30
This six axis robot arm is controlled by hand with 6 slide controls. It is an experimental project to research movements and for challenges.
Project Owner Contributor

Cable Six Axis Robotic Arm

3d-meister3D Meister

422
18
23
A fun unofficial electronic badge for Defcon 25
Project Owner Contributor

BB01 - DC25 Tribble/TriBB01 Badge

anotheremilyanotheremily

86
13
7
An unofficial Defcon badge. Because sleep deprivation is fun.
Project Owner Contributor

Rosetta - DC26 (Unofficial) Badge

anotheremilyanotheremily

907
12
6
Participate to improve the life of amputees. Low-cost prosthetic hand. Try to give some "feelings" with vibration.
Project Owner Contributor

Economic Prosthetic Hand

pauline-chevalinPauline Chevalin

1.1k
10
14
Decal Evolved-Composite Application Layer for robotics
Project Owner Contributor

DECAL

morningstarMorning.Star

419
7
5
Jam Glonass but not GPS or Galileo. So far I am thinking - 3 separate RF amplifiers with a circulator on the output of each one. 20W each.
Project Owner Contributor

glonass signal jammer

adam-quantrillAdam Quantrill

1.2k
5
7
Using computer simulation to design a control system for balancing robot made of laser-cut acrylic.
Project Owner Contributor

Laser-cut Balancing Robot "LaserBot"

kirill-salitaKirill Salita

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday