Projects Gertlex likes and follows

Sort by:

Adding a speaker jack to Samsung Level U Headphones

Bluetooth Headphone Mod

Kame is a quadruped robot with 8 servos and an ESP8266

Kame, ESP8266 based quadruped

javier-isabel Javier Isabel

The 2016 Hackaday Prize

Modular self-reconfigurable robot, focused on all-terrain search and rescue operations using bio-inspired locomotion mechanisms

Dtto - Explorer Modular Robot

alberto Alberto

The 2016 Hackaday Prize

(Mr.Robot's) fsociety inspired Mechanical keyboard. Wirelessly sense, assist and automate your good and bad computing activity.

The fsociety Keyboard

pamungkas-sumasta Pamungkas Sumasta

An open-source, affordable, dynamic quadruped robot

mjbots quad

josh-pieper Josh Pieper

Billy Bass hacked to move its mouth to audio, as well as an array of 13 of them that can have conversations with each other

Hack'd Billy Bass Alexa and More...

josh-valdes Josh Valdes

This is my attempt to make a small robot powered by the fantastic tl-wr703 running openwrt

OpenWrt Powered Robot

The 2015 Hackaday Prize

See if ultrasonic cavitation can be used to fixate atmospheric Nitrogen less expensively than the Haber process.

Improve the Haber process

peter-walsh Peter Walsh

IoT device(s), installed on my laundry machine, which will learn to approximate the remaining time with machine learning

laundrylearn

tobias-schmitt Tobias Schmitt

Our hands and especially fingers the first to suffer from the cold and most in need of protection from the environment.

Carbon tape heated gloves

Arduino based curtain opener/closer to integrate with our DIY Smart Home

WiFi Controlled Curtains

kyle-rector Kyle Rector

a 3d printed electromechanical clock

TORLO

ekaggrat-singh-kalsi ekaggrat singh kalsi

The 2017 Hackaday Prize

Golem is personally designed and comes in roughly 2.5 feet (76.2 cm) in diameter and weighs 16 pounds (7.3 Kg).

ROS Hexapod Robot called Golem running ROS

kevin-m-ochs Kevin M. Ochs

Boot to best resolution for all sources behind KVM or matrix switch,emulate E-EDID to fix display&audio issues even where there's no monitor

EDID Inserter

The 2017 Hackaday Prize

the robot is controlled with an arduino nano and only uses 2 motors and 2 sensors. The program to control the robot is only 843 bytes big.

1 KB 6 legged crawling bot

brian-brocken Brian Brocken

There is sunshine all year round in LA. Time to make use of it and bring the 'Farm to Table Revolution' home.

Hydroponic Vertical Veggie Grower

jasmine-brackett Jasmine Brackett

A 6DoF electromechanical human-machine interface from key reels

Joysix

An attempt at a DIY watch focused on low-power, high performance operation

Time Machine Mk. 8

eric-min Eric Min

Metalworking, Repairs, Tools and Tinkering

Workshop stuff

martijn Martijn

it's a boat, and it's remote controlled.

remote controlled boat

How to make a nice aluminum etching at home or in a small workshop. Full guidance from Endurance.

How to make a nice aluminum etching at home

George I Fomitchev