Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects shane.snipe likes and follows

23.2k
6.7k
111
A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp
Project Owner Contributor

Pick and place machine - Smoothieboard/OpenPnp

johnJohn

22k
4.5k
242
Blackbox shifts 3D printing towards a multitool manufacturing robot.
Project Owner Contributor

Multitool 3D Printer - Blackbox

marc-schmannMarc Schömann

152.8k
3.2k
618
Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.
Project Owner Contributor

DIY hobby servos quadruped robot

miguel-ayuso-parrillaMiguel Ayuso Parrilla

4.4k
1.5k
17
Building a Pick and Place machine on the cheap, in a repeatable way.
Project Owner Contributor

Thrifty Pick and Place

alastair-youngAlastair Young

42.5k
668
493
A maker friendly capstan based BLDC driven quadrupedal robot kit.
Project Owner Contributor

Stanley - the capstan based quadruped kit

aheadAhead

70.3k
436
362
3D Printed ESP32 Powered Video Streaming Robot
Project Owner Contributor

ESP32 WiFi Robot

maxkMax.K

17.5k
342
239
A 3d-printed bipedal robot. A desktop option for semi-direct drive walking research.
Project Owner Contributor

TipTap

darren-v-levineDarren V Levine

13.8k
289
195
good looking and clever 4-legged robot
Project Owner Contributor

Dizzy Wolf

mishaMisha

6.5k
155
45
Terrain-going quadruped. 3D printable. Two servo drive.
Project Owner Contributor

Landbeest walking robot

dejan-risticDejan Ristic

18.6k
144
130
The reduction of strain-wave, but using a 'single' stage planetary gearset.
Project Owner Contributor

MPRT - Modified planetary robotics transmission

masterofnullMasterOfNull

9.1k
138
85
Brushless driven four leg quadruped
Project Owner Contributor

BLDC Walker

peter-wasilewskiPeter Wasilewski

7.5k
63
39
By means of motor vectoring
Project Owner Contributor

Model rocket with active stabilization

domus-amorisDomus Amoris

8.7k
46
40
A gateway to making your own Badge Add-ons
Project Owner Contributor

Simple Add-ons (SAO)

twinkletwinkieTwinkleTwinkie

4.3k
45
52
Little Flash runs for twenty minutes, charges in ten seconds.
Project Owner Contributor

Little Flash

mike-rigsbyMike Rigsby

5.5k
41
25
A custom-built pick-and-place machine running OpenPnP.
Project Owner Contributor

Pick-and-Place Machine

lanceLance

11.3k
41
30
a machine to create canvas paintings of your favorite digital images
Project Owner Contributor

If ( ) Then {Paint}

john-opsahlJohn Opsahl

4.6k
30
17
A 3D-printed 10000 : 1 gear reducer and control hardware used for astrophotography
Project Owner Contributor

Astrophotography Camera Mount

chrisChris

7.3k
21
19
A multi axes (XY) CNC pen plotter machine
Project Owner Contributor

CNC pen plotter

danielDaniel

1.5k
13
14
RAP is aimed at developing from scratch - ie no ROS - the HW and SW of a four-leg robot with sensors enabling an autonomous walk.
Project Owner Contributor

RAP an autonomous quadruped robot

philippe-eliePhilippe Elie

549
5
8
This is a small line follower with PD control, made from RC helicopter frames
Project Owner Contributor

Small race competition line follower

victor-serranoVictor Serrano

784
5
6
A mostly 3D printed reciprocating saw that has different pull and push speeds/torque that uses broken PoundLand blades
Project Owner Contributor

3D Printed Unbalanced Motion Reciprocating Saw

bogdanthegeekBogdanTheGeek

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday