Projects Harry Gao likes and follows

Sort by:

The 2018 Hackaday Prize

Fully functional floor piano, with midi in/out, leds and training mode.

Cheap Expandable Floor Piano

Official Hackaday Prize Entry

A control panel for increasing the realism of Kerbal Space Program with manual control, autopilot scripts, and multiplayer mission control.

Kerbal Space Program Control Panel

lukas-vozenilek Lukas Vozenilek

Cheap, Small, Open Source Servo Controlled Robot Arm

MeArm - Your Robot

benphenoptix ben.phenoptix

This project is a brief tutorial from acquiring multiple images to a finished 3D print of a real world object.

Photogrammetry 3D Scanning

The 2016 Hackaday Prize

An overhaul of the iconic Power Glove to allow it to control robots, drones or anything your heart desires. It's so... good.

Power Glove Universal HID

nolan-moore Nolan Moore

The 2017 Hackaday Prize

A smartphone controlled balancing robot using bluetooth, stepper motors, homemade electronics and 3D designed / printed parts.

Android Controlled Self Balancing Robot

arcadia-labs Arcadia Labs

Build log of a 450mm quadcopter AKA drone frame.

Hiro 450mm Quadcopter Build

richard-hogben Richard Hogben

A 7 segment display Arduino clock with RTC, alarm and brightness control.

Yet Another Arduino Clock

Open Source competition robot development. You will never be alone for your contest again!

Open Robotics Eurobot

The 2018 Hackaday Prize

Software and Hardware to make Word Clocks easier to make

Confagrid

stephen-legge Stephen Legge

uGFX was written for use with makefiles. Using it in arduino is possible with minimal effort, though. Here's how.

using uGFX in Arduino

Using a fully 3d-printed two-axis rotational stage, an arduino and a camera to produce accurate 3D Models

High Quality 3D Scanner (<100€)

The 2016 Hackaday Prize

From a plastic bottle to a new 3D printed object in one process.

Bottle Recycling 3D Printer

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

The 2018 Hackaday Prize

Model and 3D print a mold to create a silicone rubber "skin" lattice for an easy to make custom prosthetic hand that matches your 3D scan

3D Scan to Custom Soft Prosthetic Hand

curt-white Curt White

A slightly unsafe journey into alternative fuels.

Run a small engine on WATER! Ends with a BANG!

TheThriftstoreHacker

Official Hackaday Prize Entry

Chording in space for easier control and input , an older idea for the new era.

Chordy KEY

The OnoESC is a 32-bit 30A 3S sensor-less brush-less motor controller that is Arduino Zero compatible.

OnoESC 32-bit 30A ESC

colton-black Colton Black

Do you want to build a Robot that can walk dance and sing for you! Then this is the ultimate guide that can help you through.

How to Make a Walking Robot

diy-guy-chris DIY GUY Chris

A 1960s-style mini (decreasingly) reminiscent of the PDP-8 scratch-built out of 74xxx logic, including software.

CFT 16-bit Mini-Computer

alexios-c Alexios C

This uMQTT package complies with MQTT 3.1.1 protocol, commonly used for data transfer in the embedded IoT domain.

uMQTT Software Package

rt-thread-iot-os RT-Thread IoT OS