0%

0%

semigg

projects

none

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/05/2020.

My Projects

This is a mechanical press. It has about 200 kg/ 440 lb press capacity (theoretically). The working area is about 100x100x150 mm.

Building a Mechanical(Geared) Press (3d printed)

I made this 3d printed high torque worm gearbox. It called also winch, hoist or crane. The maximum force it can lift is 737 newtons (75 kg)

3D printed high torque gearbox - An electric hoist

100 kg / 215 lb pushing/pulling force, 7mm/s piston speed, 100mm stroke (adjustable limitswitch)

3D printable linear servo actuator

This is a 3d printing modular pulley system.Total mechanical advantage is 8:1. So, we can lift a mass of 80 kg with a 10 kg pulling force.

3D Print High Strength Pulley System(Block&Tackle)

How about instead of physical contact meshing, a non-contact magnetic meshing by permanent magnets?

Magnetic Gears

3D printed realistic 2 stroke engine model. It can be almost completely printed with a 3d printer.

2 Stroke Engine Model

View all 7 projects

Projects I Like & Follow

Hackaday Prize 2019

A powerful, compliant actuator for legged robotics

OpenTorque Actuator

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

Hackaday Prize 2019

Environmental sensing for everyone.

FieldKit

shah-selbe Shah Selbe

The 2017 Hackaday Prize

An affordable modular platform for open robotics development for hackers. Provides a jump start to build your own robot.

MORPH : Modular Open Robotics Platform for Hackers

roald-lemmens Roald Lemmens

My Final Year Dissertation Project - Awarded with a First Class Degree

Hexapod Modelling, Path Planning and Control

Canberk Suat Gurel

Hackaday Prize 2019

The Arduino Nano Quick Project. Develop Everywhere.

Arduino Nano QP

alain-mauer Alain Mauer

Hackaday Prize 2019

An open-source four-legged robotics platform

Spike, the Robot Dog

michael-g Michael G

Driving controller-less graphics LCD with Arduino

Arduino CLGLCD

Hackaday Prize 2019

A modular STEM kit (for youth and adults) built around Water Bottle Rockets

Water Bottle Rocket Science Kit

darian-johnson Darian Johnson

Hacking Velux remote with a hat to enable voice control over a raspberry pi powered by Snips

Voice control for Velux

The 2017 Hackaday Prize

Lumos mimics the natural light of the Sun in order to regulate sleep-inducing hormones & improve sleep using Machine Learning

LUMOS: Smart Lamp for Better Sleep

By combining 3d parts, gyro, and a stepper, I made a programmable foot pedal for my cheap GTAW welder! General remote knob turner.

3d Printed knob turner - remote TIG amp control!

This project is a answer to question "How a DIY nano drone look,feel and fly made out of MDF ,3D printed parts?".

DIY Nano Drone

ramkumar-r RAMKUMAR R

A custom Kerbal Space Program Controller so that my kid (myself) can launch rockets.

Kerbal Space Program Controller

The 2018 Hackaday Prize

The project focuses on an open source design of a gripper with tactile sensor system for robotic hands and exoskeletons

Open source Tactile sensor enabled robotic gripper

aman-garg Aman Garg

The 2018 Hackaday Prize

The Nixie Shield allows an Arduino board to connect any nixie tube you want to use in your projects.

Nixie Tube Shield for Arduino

marcin-saj Marcin Saj

In this project we show you how to turn a cheap RC car into a programmable robotic vehicle that you can use in all sorts of projects.

Simple programmable robotic vehicle - $20 or less

Pretty much what it sounds like...

Remote Control Fiberglass Boat

grant-giesbrecht Grant Giesbrecht

View all

Bits