0%

0%

jackthehandymanengineer

I'm Gianluca, an engineer and maker passionate about tech. I create DIY projects from scratch and share them as open source.

Italy

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/13/2024.

My Projects

DIY head tracker for RC models, making you feel like you’re onboard your model; an open-source and low-cost project.

Head tracker for RC models via PPM

jackthehandymanengineer

Projects I Like & Follow

The 2018 Hackaday Prize

This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.

Smart Motor Driver for Robotics

danny-fr Danny FR

Supplyframe DesignLab: 2023 Hackada…

Strip down PET#1 Recyclable plastic bottles. Convert into new usable 3D filament. Load up your favorite 3D printer and recreate!

The Recreator 3D - Make Recycled PET#1 3D Filament

joshua-r-taylor Joshua R. Taylor

The 2016 Hackaday Prize

This project aims to build a tilt sensor that is cheap, very accurate and has a wide measuring range (up to 360 degrees).

A new high accuracy tilt sensor

aron-molnar Aron Molnar

The 2017 Hackaday Prize

Visually Programing ESPcopter - ESP8266 based programmable Drone with Visuino

Programing ESPcopter - ESP8266 Drone with Visuino

boian-mitov Boian Mitov

This will emulate the AVR code right out of the .ELF file

Arduino ATmega 328 Emulator

An open source HW & SW motor controller for fine-grained control of brushless DC motors for robotics.

SmoothControl

matthew-moore Matthew Moore

Raspberry Pi Based Hardware Sampler / Synth Platform

SamplerBox 1

Hackaday Prize 2019

An open-source four-legged robotics platform

Spike, the Robot Dog

michael-g Michael G

Add a second brain to your Arduino Mega

RetroShield for Arduino Mega

2021 Hackaday Prize

One of my most advanced projects to date. A tracked robotic development platform that [hopefully] raises the bar for hobby robotics.

Autonomous tracked robotic platform UGV

maximiliano-palay Maximiliano Palay

Rotary Encoder with USB Interface based on ATtiny85

ATtiny85 TinyKnob

stefan-wagner Stefan Wagner

COMPLETE PROJECT WITH A CHIP ELECTRONIC PARTS ARDUINO COIN ACEPTOR (USED FROM OLD MACHINE) POWER SUPPLY 6 RESISTORS RELAY 12 V

ARDUINO SINGLE CIGARETTE VENDING MACHINE

The 2018 Hackaday Prize

Following a supercharger mod on my 1990 Corrado, I realized that I needed a unique tube design to ensure proper fit and no preassure leaks

3D Printed Boost Tube Replacement

Software Defined Radio On The Go

sdr-otg

Making a Minecraft clone that runs on the Teensy 4.1 in the Arduino environment.

Arduino Minecraft

dylan-brophy Dylan Brophy

A hopeful entry into the 2021 Microtransat competition for autonomous drones to cross the Atlantic ocean

Dugong - The Autonomous Ocean Drone

I made a 3d printed sign for a friend's youtube channel. It has some addressable leds and it's controlled with an attiny85

Custom 3d printed sign with addressable leds

albert-gonzalez Albert Gonzalez

An open source Arduino based robot controller for servo based multi joint robots like quadruped, hexapods, robotic-arms, bipeds, humanoids.

Robot Controller MJS-A with 32 Servo Output

red-chili Red Chili

View all

Bits