Close
0%
0%

Tom Janssens

Somewhere in between electronics and design. Always with the approach of simplicity and clear lines.

Hamburg
Following
Send a private message
Similar accounts worth following
2 Followers
24 Following
1 Projects
9 Likes
tom-janssens
Send a private message

This user joined on 10/26/2020.

850
905
0
9
The Sonos Remote Station describes my first steps in freeform electronics.
Project Owner Contributor

Sonos Remote Station

tom-janssensTom Janssens

97.6k
1,351.6k
76
2.1k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

16.3k
10.5k
14
28
This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!
Project Owner Contributor

LTE CAT-M1/NB-IoT Shield for Arduino

timothy-wooTimothy Woo

15.9k
3.7k
11
69
Development of a robust low cost 3D printed hand prosthesis using off-the-shelf components.
Project Owner Contributor

biohand - Low cost 3D printed hand prosthesis

martin-vincent-bloedornMartin Vincent Bloedorn

15.6k
15.7k
3
51
A home automation solution that utilizes a Raspberry Pi server, 433MHz radios, and an Android app.
Project Owner Contributor

Low Cost Home Automation

daniel-hankewyczDaniel Hankewycz

14.4k
6.9k
14
53
Fully functional floor piano, with midi in/out, leds and training mode.
Project Owner Contributor

Cheap Expandable Floor Piano

fredericFrederic

8.5k
2.9k
7
26
Fully open source remote control for common electric skateboards using the NRF24L01+
Project Owner Contributor

Open esk8 Remote - v1

timo-birnscheinTimo Birnschein

7.2k
7.2k
11
45
An Arduino controlled infinity mirror mask. You can even see while wearing it!
Project Owner Contributor

Infinity Mirror Scuba Mask

curt-whiteCurt White

6k
6.1k
3
27
Design for 3D printed Helmholtz Coil that can be configured for any wire size, number of wraps and magnetic strength
Project Owner Contributor

Highly Configurable 3D Printed Helmholtz Coil

chasinspinChasinSpin

5.6k
5.6k
0
18
This solution has a number of unique benefits, a sensor platform with webserver, powered over Ethernet, accessible and programmed by browser
Project Owner Contributor

IoT Ethernet Sensor using Power over Ethernet

deandobdeandob

5.4k
4.7k
0
27
I wanted to make my own helmet cam which would also show data about what was going on (e.g. speed, altitude, temperature).
Project Owner Contributor

Raspberry Pi GPS Helmet Cam

martin-ohanlonMartin O'Hanlon

4.8k
4.8k
0
7
was given a Raspberry Pi as a gift and have been on a mission to learn everything it can do.
Project Owner Contributor

Raspberry PI

hatterofthewasteHatterofthewaste

4.6k
4.7k
5
52
The most integrated FPGA module as of 2017
Project Owner Contributor

The 'Configum-2' FPGA module

knvdKn/vD

3.7k
1.9k
0
17
Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.
Project Owner Contributor

Octoshield

goodwinGOODWIN

1.5k
1.5k
0
12
A workshop on IOT including a simple IOT device using Wemos D1, a DS18B20 temperature sensor, a battery shield and a rechargeable battery.
Project Owner Contributor

Simple IOT

radu-motisanRadu Motisan

873
901
0
14
IR Remote Control based on ATtiny13A
Project Owner Contributor

ATtiny13A TinyRemote

stefan-wagnerStefan Wagner

719
0
4
REMOTE CONTROL of 2 momentary contacts 1 at a time via 2 wires
Project Owner Contributor

REMOTE CONTROL via 2 wires

boelens-lelandBoelens, Leland

Share this profile

Share

Bits

Send a private message to Tom Janssens

Become cool instantly

Create your Hackaday.io profile like Tom Janssens and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday

Report user as inappropriate

You are about to report the user "Tom Janssens", please tell us the reason.