0%

0%

GOODWIN

Just want a place to publisk my creations ;)

France

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

YouTube

This user joined on 03/19/2020.

My Projects

Sata backplane design to go in my DIY NAS case

Backplane for DIY NAS

goodwin GOODWIN

Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.

Octoshield

goodwin GOODWIN

Projects I Like & Follow

A piezo inkjet printer built from scratch

DIY Inkjet Printer

dominik-meffert Dominik Meffert

The 2017 Hackaday Prize

3D printable, Open Source Hardware, tripod kinematics, cable driven 3D printer

Arcus-3D-C1 - Cable 3D printer

oshpark

electronic conference badge for 2018 Open Hardware Summit attendees

2018 Open Hardware Summit badge

oshpark oshpark

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board

thingSoC ESP32 Android/IoS GUI Control

pattern-agents Pattern Agents

The 2015 Hackaday Prize

open source circular knitting machine replicable with digital fabrication and makers' tools.

Circular Knitic

varvara-guljajeva varvara guljajeva

Interface a Pi Zero directly to a Commodore 64 via User Port and IEC. Give your C64 a Linux upgrade.

Raspberry Pi Zero W / Commodore 64 Interface Board

leif-bloomquist Leif Bloomquist

as I work with people all over the globe, I need a simple way to tell their local time without hanging lots of clocks on my wall

xkcd.com/now clock in hardware

The 2015 Hackaday Prize

Launchpad is a great device for musicians with many possibilities. Now you can make your own use of it without computer.

Novation Launchpad controlled by Arduino

Attempt to dive into 3D printing

3D Printer

How to turn your Raspberry Pi into an all-in-one retro gaming console

Retropie: Full guide for Raspberry Pi

A USB HID gamepad integrated into a phone case.

Cuttlephone: Gamepad Phone Case

The smallest DIL40 8085-based computer

SDC_85

The 2018 Hackaday Prize

Following a supercharger mod on my 1990 Corrado, I realized that I needed a unique tube design to ensure proper fit and no preassure leaks

3D Printed Boost Tube Replacement

Setting up RFID on a Raspberry Pi using Microsoft IOT Core.

RFID on Raspberry Pi

A raspberry pi camera running on batteries, which takes photos, HDRs, panoramas, timelapses and more.

Yet another raspberry picam

The 2018 Hackaday Prize

The Medium Machine transfers data in form of muscle contractions into the unconscious mind of a human.

Medium Machine

peter-buczkowski Peter Buczkowski

A small autonomous robot which will “see” and follow the line and take decision when it sees a turn by itself.

Simple Line Follower using Arduino

jithin-sanal Jithin Sanal

View all

Bits