0%

0%

PUTMotorsport

We are a Formula Student Electric team from Poland.

Poland

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/27/2022.

My Projects

Battery Management System (BMS) is a electronic system that manages a rechargeable battery.

6S Li-ion BMS

Our goal is to create a functioning racing car in order to participate in competitions all around the world.

Traction Control PCB

The goal of this project was a one way telemetry system for Formula Student car.

Radio-based Telemetry Receiver PCB

Circuit designed to measure uniaxial forces acting on push-rods and transmit the collected data over the Controller Area Network (CAN) bus.

Suspension Tension Meter

The BSPD is a component required for Formula Student competitions.

Formula Student Brake System Plausibility Device

This PCB is designed to handle the rear part of the Formula Student car electrically.

"Rear Box" as multitasking PCB on FS Car

View all 11 projects

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2016 Hackaday Prize

Codename Hardpass: A Password Manager on the Raspberry Pi Zero...suffering featuritis.

RPi Zero WiFi-Enabled Hardware Password Manager

Hackaday Prize 2019

Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.

Bobble-Bot

mike-moore Mike Moore

The 2017 Hackaday Prize

Creating a four legged robot with a running bound gait.

Mr. Runner

alex-martin Alex Martin

The 2015 Hackaday Prize

A low cost, full featured open source, industrial camera

Open Source Industrial Smart Camera

The 2016 Hackaday Prize

Use your lasercutter to make an optics bench.

Lasercut Optics Bench

peter-walsh Peter Walsh

Too simple for a project page & which may never happen.

Silly hardware wishlist

lion-mclionhead lion mclionhead

Supplyframe DesignLab: 2022 Hackada…

EBM - 3D Metal & Ceramic Printer - Electron Beam Melting

3D Metal & Ceramic Printer

agustin-cruz Agustin Cruz

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

Hackaday Prize 2019

Open-source long-range camera remote control with intervalometer and PC interface

Silver

This is a DIY LiPo pack for the original Gameboy (DMG-01) that requires zero modification to the console itself.

USB Rechargeable LiPo Pack for Original Gameboy

Hackaday Prize 2020

Suspended Additive Layer Extrusion Manufacturing - 3D Printing extremely large multi-storey structures.

SALEM - Construction 3D Printing

jonknutton jon.knutton

Short floating point in Verilog. Short floating point is useful for audio/video encoding where speed is important.

Compact Floating Point FPGA Hardware

bruce-land Bruce Land

Educational Kit CanSat with technology LoRa

CatSat 1

Sometimes simple is better.

A 3D Printed Simple "Walking" Mechanism.

greg-zumwalt Greg Zumwalt

Bits