0%

0%

Jon Random

Student

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/29/2018.

My Projects

I am trying to build a verily cheap LoraWan gateway with a ESP32 MCU.

ESP32 Lora Gateway

This board is based on the TI TPS63070 which is a buck-boost converter chip. It boosts a high range of voltages to 3.3V or 5V.

TPS63070 DaughterBoard

The LCD of my ART SGE MACH II was a bit dim. Since I had a generic 1602 LCD(for Arduinos and stuff) on hand I decided to swap them.

SGE MACH II Repair

I made 5 RGB LED light tubes, made to look like fluorescent tubes. Originally these were made for a music video as a background decoration.

RGB LED Light Tubes(fluorescent style)

Projects I Like & Follow

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

The 2018 Hackaday Prize

Tiny robot for Hacking and EdTech.

Skoobot

william-bill-weiler William (Bill) Weiler

Hackaday Prize 2019

Very new chip by Microchip(Atmel) ATmega4809 has a very unique CPLD like logic and also promised to be applied to next Arduino, why not try!

ATMega4809 developing board project

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

Charlieplexed LEDs 3D-soldered together to make blinky platonic solids!

LED Polyhedron

The 2017 Hackaday Prize

Emergency Button for 7$ based on ESP8266 Wifi board

Emergency button : Reliable, Inexpensive & Design

jeanperardel jean.perardel

The 2015 Hackaday Prize

Home automation has been in vogue lately, but adding it to an old house can be quite the mess. fHome is a shot at solving that.

fHome, a cheap and easy home automation system

gabriel Gabriel

Open Source SHRED-Buddy3D UPcycler turns leftover filament bits, bottles & fishing line into pellets for 3D printing.

3D Printed Open Source UPcycler : SHRED-Buddy3D

venture-bit Venture Bit

The 2017 Hackaday Prize

Networked energy-metering nodes (at 10A 85-265VAC) nodes for home and building automation. And smart capacitive light switches, too!

Networked energy metering and home automation

UV Exposure Unit reproducable in every Hackerspace with a Laser-Cutter.

UV Exposure Unit

Cheap WiFi Module for Internet of Things (IoT) projects

ESP8266 Arduino Tutorial and Review

The 2015 Hackaday Prize

The kit development aimes at designing a universal training board that can cover a wide range of experiments

Comprehensive Laboratory Developme Kit for AVR MCU

Using new technology to bring an old 4 axis DC robotic arm back to life

RobotResto: Restoring a 4 Axis Arm

The Personal Robot

Kibitech

The 2017 Hackaday Prize

255 sounds wav pcm FX sound player

Talking robot

A PCBA designed to make long distances low power IOT applications possible.

Wave One Sub 1Ghz IOT Sensors

nicholas-johnson Nicholas Johnson

A 3d printed version of the NaBi robot developed at UCLA

NaBi a sideways walking robot: 8BitRobots

tim-wilkinson Tim Wilkinson

The barometric control of the drone is lagging if there is any wind outside. So I decided to modify it.

Syma X56W barometric mod

View all

Bits