0%

0%

Simon Jansen

So many projects so little time

Enschede, The Netherlands

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/09/2015.

My Projects

Add mapping & MQTT-interfacing with ESP8266 and an IMU

Old Roomba, new tricks

Assimilating my classic RRRRRRING!! doorbell into the hive.

Smart classic AC doorbell

Make a bedroom floorlamp with control for smooth wake-up

LED floorlamp with MQTT control

Commanding your HEOS system with Home Assistant using MQTT

HEOS MQTT Translation

Projects I Like & Follow

The 2016 Hackaday Prize

8-channel (BBQ)-Thermometer hooked to your WLAN

BBQ WLAN Thermometer

Embedd an esp8266 embedded inside the roomba for web based control and statistics

ESP8266 controlled Roomba

fredrik-markstrm Fredrik Markström

iRobot Roomba 690 enhanced with a Raspberry Pi Zero 2W and IMU.

Roomba RPi

josh-gadeken Josh Gadeken

An autonomous little boat that scans and maps lakes and rivers.

Small Autonomous Survey Vessel

cees-meijer Cees Meijer

Attract mosquitoes with the help of CO2 gas and octenol extracted from mushrooms, then dehydrate them in a trap.

Mosquito Trap

Another Satisfying Single Wheel Terrifying Hoverboard Conversion

A Wheel

daren-schwenke Daren Schwenke

96×96 RGB LED matrix used as a 24/7/365 poster for my workshop

Game of Life as a wall poster

voja-antonic Voja Antonic

Making myself a power meter for my road bike

Bicycle Power Meter DIY

A locked box which can only be opened when a password is spoken.

Durin's Box

Some time we need to make Arduino board working on outdoor, in this case we need a mobile power source for the Arduino, this is the best way

9V Rechargeable batteries box for Arduino

The 2018 Hackaday Prize

You all know that moment when you discover that your houshold device you got for free is fully hackable.

RooMQTT

I found a Roomba in an e-waste bin and decided to give it the gift of SLAM

Roomba 537 SLAM

Balanced Door with self-adjusting end stop

Chicken House Door with 10 years reliability.

Wired doorbell sensor running Firmata that can be used by Home Assistant

Wired doorbell sensor for home automation

I have created a nice fit 3D case that's is printable and includes buttons and on/off switch for Kevin Bates Arduboy Dev Kit.

Ardubot 3D Printable Case

Today in this tutorial, I have made a SELF-BALANCING robot with ARDUINO. I hope this article will help the beginners to make it properly

Arduino SELF-BALANCING Robot

Een kastje met LED's dat het hele jaar bijtijds waarschuwt wanneer je de afvalcontainer aan de weg moet zetten.

Afvalalarm

jeroen-brinkman Jeroen Brinkman

GPS-RTK HAT for Raspberry Pi extension board with cm-level, high-precision RTK-GPS positioning

GPS-RTK with cm-level high-Precision Positioning

View all

Bits