0%

0%

edkirk1

Home machinist and hobbyist.

Vista, California

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/11/2016.

My Projects

I wanted a 3D Printer with servos instead of the usual stepper motors. After searching I could one and it was incomplete so I build my own.

CoreXY 3D Printer using servos

edkirk1 edkirk1

Things I've Built

Design and built multirotors, camera gimbals, 3D Printers

Projects I Like & Follow

The 2016 Hackaday Prize

Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.

ODrive - High performance motor control

oskar-weigl Oskar Weigl

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

The 2016 Hackaday Prize

3D Printed components and other hardware to make a PCB routing machine, which inherently can do other things.

3D Printed PCB mill

7-Segment clock that has a full colour display.

RGB 7segment desk clock

david-hopkins David Hopkins

The 2016 Hackaday Prize

Autonomous intelligent IOT nodes connected to the home network, controlled via simple IFTTT style rules, configured via web interface

WiFi Based Distributed IOT Home Automation

3D Printed holder: Allen wrenches are held in a circle by a single o-ring, all individually accessible.

Improved Allen Wrench / Hex Key Holder

alex-rich Alex Rich

The 2015 Hackaday Prize

3d print your own synthesizer controller! Multiple sections fit together so you can expand it as much as you need!

Modular Synthesizer Controller Keyboard Case

t-b-trzepacz T. B. Trzepacz

Security firm Praetorian outfitted drone with custom IoT sniffing hardware to learn how many connected devices are being used in Austin, TX.

Internet of Things Map Project

pauljauregui paul.jauregui

A card reader that uses black and white squares to identify a card.

Barcode Binary Card Reader

pete-prodoehl Pete Prodoehl

Looking for a simple Real Time Clock module to stack on your Raspberry Pi? Check out this project explaining how to build and install it!

An elegant stacking Real Time Clock for Raspberry

stefano-balzan Stefano Balzan

SMART LED FLASHLIGHT - a tiny personal emergency Light sensing LED flashlight, made from available components and very simple for replicate

Light sensing LED flashlight

http://white-robot.com/

The 2016 Hackaday Prize

I am upgrading my prusai3 to a massive build volume during which I will also be adding peristaltic pumps, for printing batteries

3d Battery Printer

The 2017 Hackaday Prize

A loving family robot dog

Bit the RoboDawg

orlando-hoilett Orlando Hoilett

A little arduino based clock

Arduino Stardate Clock

phil-culmer Phil Culmer

Binary clock with a bit of help from CGA colors

CGA Clock

mark-jeronimus Mark Jeronimus

Project to adapt the netflix socks to run on the Lilypad (+ adaption for playstation)

Netflix socks with a Lilypad

Created a shelf for my 3D printer with ambient and printing bed lights.

Shelf for 3D-printer

timo-hyvnen Timo Hyvönen

All U can Think

The End

View all

Bits