0%

0%

Giovanni

Working on software, playing with hardware

Italy

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 03/11/2021.

My Projects

Airspeed sensors are quite expensive, while barometers are cheap. So why not making an airspeed sensor using 2 barometers?

Cheap airspeed sensor for INAV

Making it easier and more relaxing to wing foil thanks to an actively stabilized elevator and rudder surfaces

Actively stabilized foil stab for Gong V2 foil

My Lists

Active stabilized foil stab for Gong V2 foil

Make wing foiling more accessible by actively stabilizing the foil via servo actuated elevator and rudder surfaces

Curated by Giovanni

Projects I Like & Follow

The LittleArm is a 3D printed Arduino robot arm created for Makers and STEM education

LittleArm: 3D Printed Arduino Robot Arm

How to share a USB key and make a backup of a Dongle?

Share a USB dongle - Software Solution

RGB LEDs Triangular/Hexagonal Pixels Matrix.

RGB HexMatrix | IOT Clock

mukesh-sankhla Mukesh Sankhla

ARM Cortex-M4 + ARMv8. Motor interfaces. 54 I/O with UART, SPI, I2C, CAN. C++ 11 API. Cloud management. ROS-powered.

CORE2 - A computer for robots

How I added a 500W heater to my 3D printer to enable reliable ABS printing.

Enclosure Heater for 3D Printer

mark-rehorst Mark Rehorst

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

How to get the Onago to, well, fly!

Onagofly Hacking

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

peter-ptzi Peter Pötzi

Make a filament spool holder real quick.

30 Second 3D Printer Filament Spool Holder

andy-lee Andy Lee

The 2017 Hackaday Prize

Datalogger WIFI and Bluetooth for the IOT product

IOT Datalogger

reginald-sourn Reginald Sourn

The 2017 Hackaday Prize

Super Simple IoT Button. Easy to build and easy to program

A.I.B (Another IoT Button)

hendra-kusumah Hendra Kusumah

I will test the usability of the RF Explorer 3G+ IoT module from seeedstudio

Basic spectrum analyser with RF Explorer 3G+ IoT

dorijan Dorijan

Convert Kicad PCB files into GCode with isolated PCB Nets

PCB Isolation Routing Software

michael-schembri Michael Schembri

This device converts your fdm printer to a full color powder printer.

ColorPod full color 3d printing

This project has an esp8266 giving Wi-Fi functionality, LoRa module, 1.8 inch TFT display and buttons. You can make LoRa Remote or messenger

LoRa Remote Control Messenger With a 1.8" TFT

akarshagarwal98

The Icarus is a FeatherWing-compatible (Feather) board with the nRF9160, made for easy cellular IoT development.

Icarus IoT Dev Board nRF9160 (LTE-M, NB-IoT, GPS)

This workshop is focused on reverse engineering and utilizing hardware-level debuggers.

Remoticon: The Hackers Guide to Hardware Debugging

Remote control for Raspberry Pi GPIO peripherals

Remote RasPi GPIO control

peter-walsh Peter Walsh

View all

Bits