0%

0%

john

Artist, developer, Canadian

Santa Cruz

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/08/2024.

My Projects

X/Y Plotter for high wattage UV LEDs to expose Cyanotype and other printing methods.

Analog Pixel Art: DIY Cyanotype Printer

Projects I Like & Follow

The 2016 Hackaday Prize

A project about Home Automation. I want to replace my old thermostat with an IoT ESP8266 + OLED 128x64 Screen + OpenHab + MQTT + Micropython

Home automation: thermostat with ESP8266 & OpenHab

Interfacing 3.5" HD 1.44 MB Floppy drive through FDD connector with Arduino UNO

Arduino raw data 3.5" Floppy reader

lukas-vacek Lukas Vacek

A 7 segment display Arduino clock with RTC, alarm and brightness control.

Yet Another Arduino Clock

The 2017 Hackaday Prize

Fork of #AMBAP, here I discuss about the physical implementation of the bitslice architecture with russian РЭС15 (see what I did here?)

YGREC16 - YG's 16bits Relay Electric Computer

yann-guidon-ygdes Yann Guidon / YGDES

Increase the Color Gamut, Primary color purity and make stunning vivid and accurate LCD monitor with RGB LEDs. Inspired from Dolby PRM-4220.

Wide-Gamut monitor with 5050 RGB LED mod.

thomas-chanon-wangtrirat Thomas Chanon Wangtrirat

The 2017 Hackaday Prize

4x5 micro display with attiny85

Standalone LED micromatrix display

DEF CON may be canceled but we are still doing a badge

AND!XOR DC28 Badge

The 2015 Hackaday Prize

From one hub you can automate functionality on other devices (Spark, WeMo, Nest, etc.) All wirelessly!

Open Smart Hub : Home Automation

anthony-ngu Anthony Ngu

The 2016 Hackaday Prize

I started making my own Arduino(UNO)-compatible boards, and felt the need for an "automated" tester for it. I then came up with a shield!!!

Arduino Tester

clovis-fritzen Clovis Fritzen

Ever had an automatic Sliding Gate installed at your house only to open and close it manually. An easy method to get the system running.

Sliding Gate Automation

lasith-ishan Lasith Ishan

Hacking the Wink Hub to be more user-friendly for use with OpenHab and other home automation stacks

WinkHub Integration

Connect your NavSpark module to Raspberry Pi to get GPS/GLONASS/Beidou access and an on-board Arduino

NavSpark shield for Raspberry Pi

gergely-imreh Gergely Imreh

The 2017 Hackaday Prize

I'm making a Nixie Tube HAT for Pi Zero and Pi Zero W

Raspberry Pi Nixie Tube HAT

maksim-surguy Maksim Surguy

A quick, fun project with a few components and a few tools to eventually make a circuit that can be used on a DIY robot or on its own.

Obstacle Detection Circuit using BC547 w/ UTSOURCE

Simple pcb module for PICkit2

PICkit2 to AVR/Flashrom (SPI) adapter

Provides automation for a Fermax 4 + N Electronic Door Entry System

Northcliff Home Automation Door Intercom Monitor

CAN In Automation (CANOpen) - Stack for Atmel AVR's

avrCIA / CANopen

alexander-krause Alexander Krause

Arm based "analogue" synthesizer using AVR, pots and switches to have a "proper synth" UI (no/very minimal menus)

Crystal Palace

andy-preston Andy Preston

View all

Bits