Quantity   Component name
1 × ESP32-CAM Ai Thinker The main brain of this project.
1 × CKCS PB0A To power on the board.
1 × Lateral momentary push button This will be used with the CKCS module, on the K pin to power on /offf the circuit.
1 × Li-Ion battery 500mAh 3.7V To connect to the CKCS module.
1 × Momentary push button, the big 12x12 ones With a snap on red cap (or whatever color rocks your boat)
1 × SMD Buzzer, MLT-5020
1 × SMD Capacitor, 10v 330uF, 6.3x5x4
1 × THT Diode (like 1N4007 or a 1N4148)
1 × THT 10kOhm Resistor
1 × THT 330kOhm Resistor