Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Ethan Waldo likes and follows

4.1k
1.2k
11
A machine for separating uncured resin from IPA, preserving the IPA's utility.
Project Owner Contributor

IPA Dialysis Machine for Resin 3D Printing

involuteInvolute

17.7k
185
132
based on a printed frame. The design is free, the parts needed are affordable and its easy to build
Project Owner Contributor

THE 100 - The fastest 3D Printer

matttheprintingnerdMattThePrintingNerd

13.3k
103
86
A very compact, very inexpensive, very DIYable, very precise little CNC mill. This one uses 3d printed parts.
Project Owner Contributor

Minamil 3dp: another minimal CNC mill

paul-mcclayPaul McClay

11.2k
75
65
Carve PCBs at home using a machine you build!
Project Owner Contributor

The Circuit Graver

zakqwyzakqwy

12.7k
52
49
Making the most of non-ideal components in a non-ideal world.
Project Owner Contributor

Multislope ADC

nnniNNNI

4.3k
42
41
This is a project where I built a sputtering magnetron to deposit thin conductive films on surfaces.
Project Owner Contributor

Sputtering Magnetron

steve-hernandezSteve Hernandez

9.3k
39
35
A spin coater is used to spread a thin layer of liquid on a flat surface to a very precise thickness, like photoresist on a PCB.
Project Owner Contributor

DIY Spin Coater

jeroen-delcourJeroen Delcour

4.7k
34
30
Sticking 2 magnets and one piezo stack, you can make a nanoresolution piezo motor in 10 seconds
Project Owner Contributor

Hacking any linear slide/bearing into piezo motor

edwin-hwuEdwin Hwu

5.9k
32
28
This device is a part of a collection of wind turbine systems, that with 2 dc motors can generate 100 WATTS!!!
Project Owner Contributor

Bi-Generator vertical wind turbine

esposcar90esposcar90

3k
29
24
This project details the build of a scanning electron microscope and electron lithography unit.
Project Owner Contributor

My Little Scanning Electron Microscope

steve-hernandezSteve Hernandez

2.3k
28
22
A study into building a semiconductor fabrication lab for the home hobbyist.
Project Owner Contributor

Easy Bake Fab Lab

steve-hernandezSteve Hernandez

4.2k
22
19
Open source KVM switch made for the PiKVM that not only switches the HDMI and USB signals but also the ATX signal.
Project Owner Contributor

Pi-Cast KVM Switch

vileervileer

1.6k
19
18
Manufacture of photographic materials using home-made sputtering equipment.
Project Owner Contributor

Sputtering equipment for daguerreotype photography

koji-tokuraKoji Tokura

1.2k
15
18
This project allows the user to effortlessly bond wires while only utilizing one hand for both the solder and soldering iron.
Project Owner Contributor

Solder Sustainer | Effortless One-Hand Soldering

roboticworxRoboticWorx

2.8k
15
17
Use a USB-C power adapter as a power supply with selectable output voltages.
Project Owner Contributor

CH224K USB PD Decoy

stefan-wagnerStefan Wagner

2.2k
14
12
An equatorial table shall be adapted to the telescope you intend to use (size and mass) and to your location (latitude of observations).
Project Owner Contributor

3D printed equatorial table fully parametric

aeropicaeropic

1.6k
12
15
This machine fabricates incredibly sharp tips for use in scanning tunneling microscopy, which images individual atoms!
Project Owner Contributor

Zyrus Tip Etcher for Scanning Tunneling Microscopy

baird-bankovicBaird Bankovic

257
4
3
An electric furnace I built to help with material research and other experiments
Project Owner Contributor

Electric Forge and Kiln

steve-hernandezSteve Hernandez

1.1k
4
5
This is a small project to build a titanium sublimation pump for my vacuum chamber.
Project Owner Contributor

Titanium sublimation pump

steve-hernandezSteve Hernandez

163
3
3
Building a turbodrag controller from a random Ebay purchase.
Project Owner Contributor

Reverse engineering a TurboDrag pump controller

steve-hernandezSteve Hernandez

84
3
3
This was a quick build of an anodic bonding unit commonly used to hermetically bond borosilicate glass to silicon and other metals.
Project Owner Contributor

Easy-Bond : Anodic Bonder

steve-hernandezSteve Hernandez

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday