Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects J Gleyzes likes and follows

14.3k
8.3k
33
A simple power socket that contains a relay, a temperature/humidity sensor, a motion sensor and that is manageable over WiFi
Project Owner Contributor

Home Automation Power Socket

david-davenneDavid Davenne

7.9k
7.9k
17
A home automation box that allows you to connect any device and be controlled by any device and optimizes electricity consumption
Project Owner Contributor

Beaglebone Black Home Automation

ansaf-ahmadAnsaf Ahmad

5.3k
5.3k
7
A small board to do all kind of automation stuff only with an ESP8266 - 07
Project Owner Contributor

ESP-07 Home Automation Hub

janJan

6.7k
5.2k
40
A networked room that changes its appearance to simulate any environment.
Project Owner Contributor

The Holodeck: Whole-Room Environment Augmentation

fabricateioFabricate.IO

5.9k
5.2k
39
Fully 3D-printable electric longboard drivetrain with built-in idler system.
Project Owner Contributor

3D-Printed Electric Longboard

yowhwuiyowhwui

4.7k
4.7k
25
Furnaces heat stuff, often metal. This project aims to develop a simple, cheap and robust electric furnace.
Project Owner Contributor

Electric Furnace

storkenStorken

16k
3.3k
145
A compact modular design of the strain wave gear for general robotic applications.
Project Owner Contributor

Compact Strain Wave Gear Actuator(s)

leo-vuLeo Vu

2.2k
2.1k
10
Roamer is a self-charging, switch free, capacitor powered, wandering robot companion.
Project Owner Contributor

Roamer, the Self Charging Companion Robot

mike-rigsbyMike Rigsby

1.8k
1.8k
21
An open-source robot developing environment that helps inventors build low-cost robots without having to start from scratch.
Project Owner Contributor

Robot Building Kit and Development Environment

ted-huntingtonTed Huntington

6.5k
1.8k
50
If you want to enter FPV world in a cheap way, read these pages !
Project Owner Contributor

A poor man's FPV journey

jp-gleyzesJP Gleyzes

1.8k
1.5k
9
Use ESP32 as the MCU of motherboard for 3D printer.
Project Owner Contributor

CNC,3D printer motherboard,ESP32, 8 motors

markmark

1.1k
1.1k
13
MicroPython powered 3D printed drawing robot
Project Owner Contributor

TurtlePlotBot v3

russRuss

30.1k
349
68
Recycle Bin that sorts rubbish based on the sound of collision using Edge AI audio classification.
Project Owner Contributor

AI Audio Classifier Recycle Bin

samuel-alexanderSamuel Alexander

11.5k
128
96
A cheap but precise Weather Station (Lora transmission)
Project Owner Contributor

Long Range Weather Station (65€)

jp-gleyzesJP Gleyzes

25.4k
117
104
portable flexible panel + MPPT controller + solar tracker system less than 55 USD ????
Project Owner Contributor

Low cost solar panel solution (MPPT + sun tracker)

jp-gleyzesJP Gleyzes

5.8k
49
57
How to build a fully working noiseless HDD clock. Almost a piece of art !
Project Owner Contributor

Hard Disk Drive analog and digital clock

jp-gleyzesJP Gleyzes

3.7k
39
28
Rezodo aims at building a distributed irrigation system and a weather station with farmers. It's also a fully open platform for IoT learning
Project Owner Contributor

Rezodo: Long Range irrigation and weather station

jp-gleyzesJP Gleyzes

2.6k
20
25
Another Satisfying Single Wheel Terrifying Hoverboard Conversion
Project Owner Contributor

A Wheel

masterofnullMasterOfNull

3k
18
19
This automatic chicken coop door will help to keep your chickens safe
Project Owner Contributor

Kokot: a low energy chicken coop door

jp-gleyzesJP Gleyzes

1.2k
7
5
Using the SimpleFOC Arduino librery we wish to drive a NEMA23 stepper using Field Oriented Control and possibly interface to Klipper HOST
Project Owner Contributor

Field-Oriented-Control Stepper driver

juan-antonio-sren-epJuan-Antonio Søren E.P.

1.9k
5
5
play motor and machine gun sounds on your RC warbird
Project Owner Contributor

RC plane sound machine

jp-gleyzesJP Gleyzes

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday