Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects sender likes and follows

98.4k
1,364.9k
2.1k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

22.4k
9.4k
146
a hardware version of your crackme and reverseme games for learning hardware reverse engineering techniques without expensive tools
Project Owner Contributor

Hardware Reverse Engineering Learning Platform

tom-van-den-bonTom Van den Bon

32.7k
8.3k
43
Arduino connects to the TX line (of a router, RPI) and display serial data on smartphone over WiFi
Project Owner Contributor

Hardware serial port monitor with WiFi

frenkyFrenky

7.2k
7.6k
47
Visually impaired students can make great use of 3D prints to learn just about any subject, but their teachers need help making good models.
Project Owner Contributor

3D Prints for Teachers of the Visually Impaired

joan-horvathJoan Horvath

13.9k
7.2k
159
Make cooler robots, faster and with less effort.
Project Owner Contributor

BowlerStudio: A robotics development platform

kevin-harringtonKevin Harrington

5.1k
5.1k
43
Self-Powered IoT Node for Environmental Sensing
Project Owner Contributor

SPINES Mote

macro-yauMacro Yau

13.9k
5.1k
73
printed - using only PETg, no flex filament needed integrated NEMA17 stepper motor only three small parts for tolerance compensation
Project Owner Contributor

3D Printed Strain Wave Gear

johannes-hasslerJohannes Hassler

43.1k
4.9k
107
This wind-up car gift card is fully 3D-printable and is the ideal present for your friends and family.
Project Owner Contributor

Fully 3D-printable wind-up car gift card

brian-brockenBrian Brocken

5.2k
4.4k
39
An e-NABLE robotics project to give hands to those without use of their hands. Designed with your help.
Project Owner Contributor

Ivan the Teambuilt Robot

les-hallLes Hall

8.1k
4.1k
44
An open source HW & SW motor controller for fine-grained control of brushless DC motors for robotics.
Project Owner Contributor

SmoothControl

matthew-mooreMatthew Moore

5.1k
4.1k
23
An Internet of Things Device to Let My Aging, Disabled Father Know that the Stove is Off, and Ease His Paranoia...
Project Owner Contributor

An IOT Device That Tells Dad the Stove is Off.

casual-cyborgCasual Cyborg

6.9k
4k
10
Small UPS with fix 3V3/1A output and adjustable 1.3 to 12V output, Li-Ion charger and protection
Project Owner Contributor

IoT UPS

christoph-tackChristoph Tack

4.2k
3.8k
26
scalable hardware for neural network system
Project Owner Contributor

NSCE-ngbrain

3drobert3drobert

992
1.3k
2
In the Lora IoT project tutorial, I have shown how to make the LoRa Arduino ESP8266 control relay from the Blynk IoT platform with feedback.
Project Owner Contributor

LoRa IoT Project With Arduino ESP8266 Blynk

subhajitSubhajit

4.3k
1k
5
A simple pocket-sized projector utilizing an Arduino
Project Owner Contributor

DIY Pocket Projector Design

sir-michael-iiSir Michael II

654
633
5
In this project we show you how to turn a cheap RC car into a programmable robotic vehicle that you can use in all sorts of projects.
Project Owner Contributor

Simple programmable robotic vehicle - $20 or less

jeffjeff

380
467
4
This robot is designed for supporting human in some specific condition, by take advantages of its special rotating forward mode.
Project Owner Contributor

Brain controlled multifunctional rolling robot

haohong-wangHaohong Wang

320
385
2
DIY electronic musical instrument; contact mic and overdriven battery-powered amplifier
Project Owner Contributor

Squeal & Scrape

barryjosephcullenbarryjosephcullen

466
336
0
A small(er) Vortex Particle separator that can be easily 3D printed. Use with a 2" or 1.25" (adapters needed - can be printed) vacuum hose.
Project Owner Contributor

3D Printed Vortex Particle Separator for Shop Vac

aaron-pAaron P.

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday