Projects Rod Kimmell likes and follows

Sort by:

BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain

BlackIce - Low Cost Open Hardware FPGA Dev Board

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

Get high-resolution 3D printing by building your own.

Laser SLA 3D printer with galvo

mark-peng Mark Peng

Hackaday Prize 2019

Very new chip by Microchip(Atmel) ATmega4809 has a very unique CPLD like logic and also promised to be applied to next Arduino, why not try!

ATMega4809 developing board project

We are going to create an AC Voltage Measuring Device using Arduino, which will estimate the voltage of Alternating Current.

AC Voltmeter using Arduino

hiotron hIOTron

2x3/2x5 IDC 2.54mm, 2x3 Pogo pin 1.27/2.54mm

AVR-ISP Pogo Pin Adapters

An OS boot selector switch based on the Pimorini Tiny 2040

Tiny 2040 Hardware Boot Switch

william-somsky William Somsky

Development Board for the new ATmega4808 Series of AVR Microcontrollers

ATmega4808 Development Board

stefan-wagner Stefan Wagner

ArduinoGotchi is a real Tamagotchi P1 emulator running in Arduino UNO hardware

ArduinoGotchi

gary-kwok Gary Kwok

Citizen science project with mobile and fixed sensors for measuring air quality using low-cost sensors and smartphones

CanAir.io Air Quality Network

Track lateral and vertical movements of a 3D printer via AprilTags. Then, get informed of malfunctions related to motion via Telegram.

IoT 3D Printer Motion & Status Tracker w/ Telegram

kutluhanaktar kutluhan_aktar

A really simple CAN network protocol for up to 30 nodes.

CAN Simple (protocol)

The 2018 Hackaday Prize

Rover is a big four wheel drive 3D printed robot you can make at home. It's CC0 open source, so anyone can use it.

Rover V2 four wheel drive robot

Six "sided" LED Randomizer a.k.a. an electric die

Hexo

thomas-countz Thomas Countz

If this doesn't wake me, nothing will

Alarm clock

voja-antonic Voja Antonic

IoT-based Home Automation with Arduino IoT Cloud & Alexa using ESP32 to control 4 home appliances with voice commands. (Circuit + Code)

Arduino IoT Cloud ESP32 Alexa Control Smart Home

A diy wide angle lens for my reflex camera

Lens for a reflex camera

A clock is a counter. This is a counter made into a clock. It counts one second at a time, until it needs to count faster to catch up

Intuitive Counter Clock

Modbus Display (Software)

hasan-kara hasan kara

A box allowing PC ports and buttons to be placed conveniently while removing a desktop PC from valuable real estate.

PC Remote Control Head

Simple analog Sanitiser Dispenser (No-Contact) using 555 timer IC with auto cut-off timer (even with trigger). Cheap and No-Coding Solution.

555 Sanitizer Dispenser (With cut-Off)