Projects Vijayasarathy Shastri likes and follows

Sort by:

Hackaday Prize 2020

for demonstration of physical laws in generating electrical energy using hydropower plant

3D printed hydroelectric power plant model

matic-markovi Matic Markovič

A cheap alternative to more expensive BLDC controllers, where only simple operation is required. More features may be added as required.

Modified ESC for Bidirectional BLDC Control

The 2018 Hackaday Prize

Zn-Cu stomach acid based bio-galvanic cell powers a hacked activity tracker small enough to swallow and reconfigured as a 'smart pill'.

Stomach Acid Powered Smart Pill

curt-white Curt White

The 2018 Hackaday Prize

Have some old phones lying around? Thinking what to do with them? Here's how you can use them.....!

Convert your old phone into a remote switch

vishwas-navada-b Vishwas Navada B

ModbusBox has embedded setup web-page. Yo do not require to program anything to connect any modbus RTU device to MQTT.

IOT ModbusBox

This Rover uses the power of ESP32 to control itself from a PC/Android Station. The Rover can be in Manual / Lane (or Object) tracking mode.

Remote ESP32 Rover (with Object/Lane Tracking)

My goal is to design a 3D printed standalone speaker based on transmission line theory - info: Martin J. King - http://www.quarter-wave.com/

3D printed Bluetooth speakers - LittleJet!

davide-ercolano Davide Ercolano

Very simple remote switch, controllable by any infrared remote control

IR2IO

Hackaday Prize 2019

For computer vision learners, drone and robot builders, AR/VR and 360 panorama experimenters. Open source hardware.

StereoPi - DIY stereoscopic camera with Raspberry

IOT - Internet of Things

Monitoring of environments

marcelo-cuin Marcelo Cuin

Keeping an eye on the seafloor (especially shellfish)

LoBSTAS: Underwater Camera + Sensor

ellie-t Ellie T

Use ESP32 as the MCU of motherboard for 3D printer.

CNC,3D printer motherboard,ESP32, 8 motors

Orange Pi 2g IoT based GSM PBX using Asterisk

Orange Pi 2g IoT based GSM PBX using Asterisk

asim-rasheed Asim Rasheed

Build a COVID-19 shield with a device that estimates skin temperature and indicates if a person might have a fever.

Skin Temperature Scanner

gilbert-franois Gilbert François

Convert Microwave into UVC Chamber.

Ultraviolet Microwave (name subject to change)

bob-alkire Bob Alkire

In this project, the objective was to build a FPV flying wing with over 700mm wingspan that could be printed under 24 hours.

3D Printed Flying wing FPV Drone

The super amazing low-cost electronic project which is the "Bluetooth Trolley Speaker"

DIY BLUETOOTH 2.1 TROLLEY SOUND SYSTEM

Hackaday Prize 2019

This device is capable of detecting different kind of weapons like gun, knife, etc.

Weapon Detector - AI /Computer vision

DIY electronic musical instrument; contact mic and overdriven battery-powered amplifier

Squeal & Scrape

barryjosephcullen

A simple way to get A/V signals out of your RadioShack Color Computer using its onboard A/V to RF connections.

RadioShack Color Computer Composite Video/Audio

Perform the MNIST digit recognition on passwords using the TinyML approach on a tiny MCU.

Unlock Passwords with TinyML Digit Recognition