Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Jo likes and follows

7.3k
7.5k
88
Neopixel watch with accelerometer.
Project Owner Contributor

Arduino Neopixel Watch

marcello-gravesMarcello Graves

6.9k
6.6k
37
A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework
Project Owner Contributor

Super atari 6502 (A "DIY" 2600 hardware clone...)

robertRobert

24k
5.3k
87
This project focuses on using building a budget powder bed 3d printer capable of printing bones, and creating the needed ink and powder.
Project Owner Contributor

Printing bones on a DIY powder bed 3d printer

jureJure

60.6k
5.3k
108
My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.
Project Owner Contributor

Desktop Arcade Machine : 3D Printed + RetroPie

christopher-tanChristopher Tan

4.4k
3.2k
25
Unique, compact power conditioning enables always-on sensor monitoring and Long-Range radio (LoRaWAN) link for IoT applications.
Project Owner Contributor

SoLoRa - Solar Powered always-on IoT sensor node

joe-millerJoe Miller

2.5k
2.9k
33
Open Source SHRED-Buddy3D UPcycler turns leftover filament bits, bottles & fishing line into pellets for 3D printing.
Project Owner Contributor

3D Printed Open Source UPcycler : SHRED-Buddy3D

venture-bitVenture Bit

2.6k
2.6k
9
Using an Wemos D1(esp8266), cheap power supply, a switch, and a temp sensor you can automate anything
Project Owner Contributor

Home Automation on the Cheap V2

thjubeckthjubeck

17.9k
1.9k
56
Building a cheap stereo camera using COTS parts
Project Owner Contributor

Low cost stereo camera

solenoidSolenoid

4.1k
1.5k
6
Infra-red light dimmer (220V/110V) that sits behind a switch in the wall. Powers itself from the mains, uses triac to turn on the bulb.
Project Owner Contributor

IR Light Dimmer v2 (1kB Challenge edition)

traxtrax

17.9k
1.4k
85
EPaper monitor driven by either VGA or an Internet Connected ESP32.
Project Owner Contributor

PaperBack: A Desktop EPaper Monitor

pkPK

1k
1.1k
3
Cheap target kettle gets the IoT treatment
Project Owner Contributor

IoT Kettle Australia

bhammerbhammer

856
877
11
No need to turn your main room light on anymore.
Project Owner Contributor

Underbed Motion Activated LED light

kristjan-berceKristjan Berce

682
761
8
A modern take on the vintage nixie effect
Project Owner Contributor

Single Tube Nixie Clock

johnJohn

1.8k
639
14
A dome of lights and cameras to produce high quality 3D scans
Project Owner Contributor

3D Scanning Dome

benjamin-blundellBenjamin Blundell

26.2k
268
251
The slightly different USB peripheral
Project Owner Contributor

pcbtc (GaN edition)

lucy-fauthLucy Fauth

8.4k
90
105
I2C OLED connected to an Attiny85 and a Charlie-plexed button matrix
Project Owner Contributor

Skeleton Attiny85 Handheld

davedarkodavedarko

2.1k
84
41
Main Page: we can't wait to see you there!
Project Owner Contributor

2020 Remoticon: Pandemic Creativity! (start here)

lutetiumLutetium

1.2k
37
34
We had a Hackaday Assembly at 35C3. Thanks to everyone who was there or came by!
Project Owner Contributor

[Hackaday] @ 35C3

elliot-williamsElliot Williams

4.7k
27
35
A simple robot built from wire
Project Owner Contributor

Freeform robot

robsoncoutoRobsonCouto

1.3k
24
18
A clock that uses flip display and show deadline time, clock time and other things..
Project Owner Contributor

Flip.Clock

makufelis-xyzmakufelis-xyz

417
20
14
We're Going to the 36th Chaos Communication Congress, and You're Coming With Us!
Project Owner Contributor

[Hackaday] @ 36C3

elliot-williamsElliot Williams

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday