Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects 3drobert likes and follows

20.6k
12.7k
305
Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.
Project Owner Contributor

FossaSat-1, Open Source Satellite

julian-fernandezJulian Fernandez

24.1k
5.9k
243
Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.
Project Owner Contributor

Bobble-Bot

mike-mooreMike Moore

5.4k
5.9k
22
A hardware and software balancing cart pole.
Project Owner Contributor

ZIPY : ZIPY Inverted Pendulum Yakshave

philip-zuckerPhilip Zucker

8.2k
2.5k
77
A Networked set Robotic Arms, Motion platforms, sensors and more. Easily programmed with a drag and drop interface.
Project Owner Contributor

Evezor Robotics and Automation Platform

anfroholicanfroholic

28.3k
2k
355
A quadrupedal walking robot
Project Owner Contributor

Dogbot

charles-galambosCharles Galambos

729
731
8
Stereo, noise free, soft on/off latch, low power.
Project Owner Contributor

4 Watt audio amplifier

carbonosilciocarbono.silício

4.7k
674
47
Eyetracking with openCV – Odroid U3 vs. Raspberry Pi2B
Project Owner Contributor

Wheelchair controled by Eyemovements

myrijamMyrijam

28.5k
439
206
If you need a refresher for digital logic before tackling FPGAs, this is the bootcamp for you!
Project Owner Contributor

FPGA Bootcamp #0

al-williamsAl Williams

10.1k
234
49
An ambitious mobile robot for testing my skills and learning new ones.
Project Owner Contributor

Droidbot 07 - Wheeled-Quadruped

paul-crouchPaul Crouch

44.3k
227
141
The goal is to build a DIY Scanning Electron Microscope (DIY SEM) with commonly available materials
Project Owner Contributor

3d Printed Scanning Electron Microscope

chrisdeerlegChris.deerleg

18.1k
205
140
I'm designing a super cheap humanoid robot platform. It is going to be the same size as an adult person.
Project Owner Contributor

Inexpensive 3D Printed Full Size Humanoid Robot

dan-dwroboticsDan DWRobotics

12.4k
136
100
Making an electron gun is a first stage of my future plans - to make DIY electron microscope/EBM metal 3D printer.
Project Owner Contributor

Metal 3D printer

hynaHyna

9.1k
114
97
This circuit accepts 6-12VDC, and outputs programmatic 8KHz 200V squarewaves to drive electroluminescent wire or small panels.
Project Owner Contributor

Multi-channel electroluminescent driver

ben-krasnowBen Krasnow

9.8k
62
54
And a tiny microcontroller
Project Owner Contributor

Breadboard VGA from TTL and SRAM

marcel-van-kervinckMarcel van Kervinck

5k
59
60
Minty Z80 is a system with virtualized I/O and minimum component count in an Altoids Tin.
Project Owner Contributor

Minty Z80

peabody1929Peabody1929

5.1k
48
41
Create gear boxes with a laser cutter
Project Owner Contributor

GearBoxes.py

florian-festiFlorian Festi

4.6k
40
35
This is an 8-bit CPU built using only 17 TTL chips. 32K ROM, 32K data, UART, microcoded.
Project Owner Contributor

CSCvon8: An 8-bit TTL CPU

warren-toomeyWarren Toomey

2.3k
39
25
submicron-scale patterning of silicon and dielectrics
Project Owner Contributor

Step-and-Scan Digital Microlithography

helgehelge

726
20
24
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
Project Owner Contributor

Electroluminescent DSKY replica

ben-krasnowBen Krasnow

531
19
13
The purpose of this project is to develop a family of logic circuits using discrete components.
Project Owner Contributor

Discrete Component Logic Family

harvey-sugarHarvey Sugar

2.2k
13
10
A board-controlled temp probe and fan to maintain temperature during a long smoke or BBQ
Project Owner Contributor

BBQ Thermostat

ericeric

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday