0%

0%

Dan DWRobotics

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/19/2017.

My Projects

I'm designing a super cheap humanoid robot platform. It is going to be the same size as an adult person.

Inexpensive 3D Printed Full Size Humanoid Robot

dan-dwrobotics Dan DWRobotics

Projects I Contribute To

Join this project to talk about robots!

Robotics Chat

dehipu deʃhipu

Projects I Like & Follow

The 2018 Hackaday Prize

A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.

3D Printed Robot Actuator

paul-gould Paul Gould

The 2017 Hackaday Prize

Micro Smart LiDAR Sensor

MappyDot

blair-wyatt Blair Wyatt

The 2017 Hackaday Prize

A quadrupedal walking robot

Dogbot

charles-galambos Charles Galambos

The 2018 Hackaday Prize

Boston Dynamics' robot dog, Spot Mini is unavailable at any price. A Chinese copy is $30,000. Cut 99% of the cost and build one at home.

Mike's Robot Dog

mike-rigsby Mike Rigsby

Put screens on your jewelry.

Video Pendant

dehipu deʃhipu

The 2018 Hackaday Prize

A 6cm 4-legged Ball Robot

4B Robot

carl-bugeja Carl Bugeja

The 2018 Hackaday Prize

This is Quadbot 17, a work-in-progress quadruped robot with 22 degrees of freedom, based on Robotis AX-12 motors and a 3D-printed chassis.

Quadruped robot with 22 DoF

dimitris-xydas Dimitris Xydas

The 2017 Hackaday Prize

A little rover robot to keep an eye on my prints inspired by the butter passing robot in Rick and Morty.

Butter Robot

The 2017 Hackaday Prize

An open-source robot that helps makers build low-cost robots without having to start from scratch.

Two Leg Robot

ted-huntington Ted Huntington

The 2017 Hackaday Prize

This six axis robot arm is controlled by hand with 6 slide controls. It is an experimental project to research movements and for challenges.

Cable Six Axis Robotic Arm

3d-meister 3D Meister

The 2017 Hackaday Prize

Robots are caught in a catch-22: need the numbers to be useful, need to be useful to justify the numbers. Open source can overcome this.

Open Source Android

This is just a hexapod made in a 3d printer to educational and ertertainment pourposes

3D Printed Hexapod

vincius-jean-ferreira Vinícius Jean Ferreira

Using computer simulation to design a control system for balancing robot made of laser-cut acrylic.

Laser-cut Balancing Robot "LaserBot"

kirill-salita Kirill Salita

The 2017 Hackaday Prize

To research and experiment with Robotics, AI, Transportation, IoT, Security and Mobility, Healthcare, Education etc

Robot

anil-pattni Anil Pattni

The 2017 Hackaday Prize

Participate to improve the life of amputees. Low-cost prosthetic hand. Try to give some "feelings" with vibration.

Economic Prosthetic Hand

pauline-chevalin Pauline Chevalin

The 2018 Hackaday Prize

MorningStar's Walking, Talking, Flying and Swimming Oracle

Pandelphi

morningstar Morning.Star

Jam Glonass but not GPS or Galileo. So far I am thinking - 3 separate RF amplifiers with a circulator on the output of each one. 20W each.

glonass signal jammer

adam-quantrill Adam Quantrill

A fun unofficial electronic badge for Defcon 25

BB01 - DC25 Tribble/TriBB01 Badge

View all

Bits

Morning.Star wrote 06/10/2018 at 08:59

Hey Dan, thanks for following #Pandelphi dude, sorry it took so long to get around. ;-)

Are you sure? yes | no

Craig Hissett wrote 07/19/2017 at 22:18

Thanks for the follow matey!

Are you sure? yes | no

Dan DWRobotics wrote 07/29/2017 at 20:48

Hey there, sorry for no reply. Was just getting used to the site. I'm a fellow robot enthusiast!

Are you sure? yes | no