Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Pavel G. likes and follows

21.4k
6.7k
76
The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.
Project Owner Contributor

Turnado Hardware MIDI Controller

liam-laceyLiam Lacey

33.3k
6.5k
188
An Off-the-grid messaging system.
Project Owner Contributor

Skrypt

taiwoTaiwo

60.9k
5.4k
108
My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.
Project Owner Contributor

Desktop Arcade Machine : 3D Printed + RetroPie

christopher-tanChristopher Tan

5.1k
5.1k
43
Self-Powered IoT Node for Environmental Sensing
Project Owner Contributor

SPINES Mote

macro-yauMacro Yau

4.4k
4.8k
52
A unique approach to 3D printing that injects curing resin into a gel. The rig is designed to be added to most hackable 3D printers.
Project Owner Contributor

Suspension 3D Printing

michaelMichael

3.6k
3.6k
31
I Designed This Educational Display to Show Others How Stepper Motors Work.
Project Owner Contributor

3D Printed Stepper Motor

anthony-garofaloAnthony Garofalo

16k
3.3k
145
A compact modular design of the strain wave gear for general robotic applications.
Project Owner Contributor

Compact Strain Wave Gear Actuator(s)

leo-vuLeo Vu

152.8k
3.2k
618
Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.
Project Owner Contributor

DIY hobby servos quadruped robot

miguel-ayuso-parrillaMiguel Ayuso Parrilla

2.9k
3.1k
15
An 8-bit TTL computer with 8 bits of address space.
Project Owner Contributor

Boxer-1 TTL Computer

boxerbombBoxerbomb

1.6k
1.6k
6
ATtiny84-based gamed of life on 8x8 LED matrix with manual setup of 1st generation.
Project Owner Contributor

Conway's Game of Life on ATtiny84

jean-franois-poilpretJean-François Poilpret

11.2k
1.4k
21
The goal of this project is to create an Open-Source-Debugger for AVRs via Debug Wire.
Project Owner Contributor

DebugWire Debugger

jan-bJan B.

96.9k
850
606
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
Project Owner Contributor

3D Printed Robot Actuator

paul-gouldPaul Gould

12.1k
268
76
Custom electromechanical motor that can be printed using any 3D printer, some coil, maybe magnets and a controller.
Project Owner Contributor

3D Printed Parametric Motor

solenoidSolenoid

259
223
3
3D printed face shield glasses and a visor that use household plastic/cling/saran wrap instead of hard plastic for those unable to obtain it
Project Owner Contributor

3D Printed Face Shields Using Plastic Wrap

connor-yamadaConnor Yamada

4.3k
90
67
Open source robotic leg for development and education of biomimetic robotics
Project Owner Contributor

OpenLeg - Open Source Dynamic Robotic Leg

joey-byrnesJoey Byrnes

3.9k
84
64
A mid-size quadruped made with off-the-shelf + 3d printed parts.
Project Owner Contributor

Dante

778-labs778 Labs

3.4k
68
60
A ROS enabled highly dynamic quadruped robot
Project Owner Contributor

Quadruped Robot Tsuki

lingkang-zhangLingkang Zhang

8.3k
64
48
3d printed 40:1 Cycloid gear actuator module using Tarot 4008 (330kv) motor and MJ-VESC Circular Type Motor Controller Inside.
Project Owner Contributor

(40:1) 3D Printed Cycloid Gear Actuator Module V2

dongil-choiDongil Choi

4.5k
62
53
An affordable quasi-direct drive (QDD) actuator with steel gears.
Project Owner Contributor

SpryDrive

ben-bokserBen Bokser

6.2k
54
42
3d printed 27:1 Cycloid gear actuator module
Project Owner Contributor

(27:1) 3D Printed Cycloid Gear Actuator Module V1

dongil-choiDongil Choi

5.4k
44
41
3d printed 8:1 planetary gear ratio actuator module with VESC firmware based circular motor driver
Project Owner Contributor

(8:1) 3D Printed Planetary Gear Actuator Module

dongil-choiDongil Choi

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday