Close

Recent Projects

Breathing life into a half a century old RCA COSMAC Micromonitor emulator of CDP1802 microprocessor
Project Owner Contributor

CDP18S030: A Microcomputer in a Briefcase

lauri-pirttiahoLauri Pirttiaho

Bridge the gap between SDR experiments and real wireless prototypes, enabling new PHY algorithms to be tested in a working RF system.
Project Owner Contributor

Building a Real-World SDR

jayoung-ohJayoung Oh

I’m working on a small IoT-based power monitoring project using an ESP32 to measure electrical power consumption to control loads
Project Owner Contributor

Load Control System

emilyjacksongbemilyjackson.gb

3x ADXL357 high accuracy accelerometer acquistion board
Project Owner Contributor

ESP32-S3 3 x ADXL357 acquisition board

jp-gleyzesJP Gleyzes

A bench power supply built around the ZK-4KX buck-boost module, with a 3D-printed case and a fan that runs only when the module gets warm
Project Owner Contributor

ZK-4KX Power Supply with Fan

catalin-serafimescuCatalin Serafimescu

ESP32 + round GC9A01 TFT humidor controller: live humidity/temp readings, fan control, custom PCB, 3D-printed enclosure. Built at BYITL.
Project Owner Contributor

HC-01 Smart Humidor Controller

jerome-privottJerome Privott

Enjoy short circuit protection for both +3.3V and +5V. Power it using USB-C or with a 9-volt battery. Now has Logic Probe support.
Project Owner Contributor

Super Breadboard 2: a breadboard on steroids

nijssenNijssen

Digitalthermometer basierend auf den Mikrochip-Controllern TMP275 und PIC16F15375 mit Ausgabe auf einem LCD-Display.
Project Owner Contributor

Digitalthermometer

hlibzgurskyihlib.zgurskyi

10,240 independent oscillators · 1-sample latency · 0.001 Hz resolution
Project Owner Contributor

FPGA Spectrum Engine

tsuneoohnakaTsuneo.Ohnaka

ESP32-S3 FIDO2 prototype: touch AMOLED, microSD apps, HID scripts, USB/BLE AirMouse and an IMU BLE Gamepad. A key that got carried away.
Project Owner Contributor

EvilKey: I Needed a FIDO2 Key. Then the Maker Brain Took Over.

michal-wojciechowskiMichal Wojciechowski

Every note of an Amiga MOD file printed on a disc, samples barcoded on the back, read by two cameras and played live... because I could.
Project Owner Contributor

The "Pro" Tracker: Optical Disc Amiga MOD Player

rob-smithRob Smith

7-segment displays A hand-bent brass wire sculpture, clock powered by ESP32-C3 with NTP time sync.
Project Owner Contributor

YUMO GLOBE - Digital Clock

yumobuildsYUMO.BUILDS

Tiny ESP32-C3 desk gadget with OLED, live weather sensing, proximity glow & a phone-controlled web interface.
Project Owner Contributor

YUMO PULSE — ESP32-C3 Desk Gadget

yumobuildsYUMO.BUILDS

A freeform brass wire sculpture featuring a round capacitive touch screen, 6-axis IMU auto-rotation, and reactive led filaments.
Project Owner Contributor

YUMO SMART CUBE: Touch screen/ESP32-S3 Brass Wire

yumobuildsYUMO.BUILDS

An ESP32-powered desk gadget with six round displays, with one touch its start spinning.
Project Owner Contributor

YUMO Roulette — A "Floating" Spinning Desk Gadget

yumobuildsYUMO.BUILDS

Explore the computer byte with this educational easy-to-solder kit. Toggle in 8 bits and see their decimal, hex or octal value. With game!
Project Owner Contributor

8-bit Workbench ED: hands-on with number systems

nijssenNijssen

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday