0%

0%

ASHUMHRPROJECTS

I am electronics hobbyiest!

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 10/30/2021.

My Projects

DIY variable power supply: adjustable 1.2-30V, 0-10A output for electronic projects. Fine-tune power source for optimal performance.

DIY Variable Power Supply

ASHUMHRPROJECTS

DIY Smart Solar Lamp. It will automatically charged in Daylight with the help of solar panel & turns on the lamp automatically during night.

DIY Solar Lamp

ASHUMHRPROJECTS

This is a very interesting yet simple project for charging battery safely by making Battery Management System.

DIY BMS

ASHUMHRPROJECTS

An inverter that uses the minimum number of components for converting a 12 V DC to 220 V AC is called a simple inverter.

Diy Simple Inverter

ASHUMHRPROJECTS

This project is designed to charge single cells Li-Ion/LiPo/LiFe with protection against overcharge and short circuits.

DIY TP4056 Charging Module

ASHUMHRPROJECTS

This is a very useful yet easy to make project. This will determine the water level in a container and prevents the overflow of water.

Water Level Indicator

ASHUMHRPROJECTS

View all 18 projects

Projects I Like & Follow

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

A 3D printed stereotax

3D printed rodent stereotaxic device

lex-kravitz Lex Kravitz

Hackaday Prize 2019

Very simple Tesla Coil - 3 components only = LED, BUL45D2G transistor and 82K resistor

Easy Open Tesla coil on PCB

RGB LEDs Triangular/Hexagonal Pixels Matrix.

RGB HexMatrix | IOT Clock

mukesh-sankhla Mukesh Sankhla

The 2018 Hackaday Prize

Relax, your home knows which appliances to switch on. Justifying "Automation" in low cost Home Automation systems.

Dexter - The New Age Home Automation

aditya-mukherjee Aditya Mukherjee

24-bit stereo DAC which is specially built for Raspberry Pi boards. This R-2R DAC delivers the clear audio output with minimum configuration

24-bit Stereo Audio DAC for Raspberry Pi

dilshan-jayakody Dilshan Jayakody

A 3D printed drone with an added pusher motor

3D Printable VTOL EDF Jet

harry-gao Harry Gao

The 2018 Hackaday Prize

UNMANNED GROUND VEHICLE, Compatible with Arduino

M1 Rover

ahmed-azouz Ahmed Azouz

Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.

Octoshield

goodwin GOODWIN

Powered from the 24v control circuit of a garage door opener. It can control the door and sense if the door is open/closed

Wi-Fi Garage Door Opener For Home Automation

In this project I will be making a Nintendo Switch style retro game console

Handheld Raspberry PI Retro Game Console

brandon Brandon

Control two relays from Blynk or Touch Sensor using NodeMCU DHT11 sensor and LDR with real-time feedback.

Home Automation With NodeMCU LDR DHT11 Sensor

A smart display that can be embed into a wall socket that controls all the IOT device in home.

Smart Home Display IOT

ANANTHAKRISHNAN U S

This project is about building your own stopwatch using the Arduino board and a few other components.

Arduino Stopwatch

hiotron hIOTron

Giving an N64 a new lease of life with a Raspberry Pi Compute Module 3

N64 Raspberry Pi Retro Emulation System

ESP32 Bluetooth Home Automation system to control 8 home appliances with Bluetooth, IR remote, and manual switches. No Wi-Fi is required.

ESP32 Bluetooth Home Automation With IR Remote

2021 Hackaday Prize

A different 3D printer concept made from scratch using recycled materials

3D printer concept Prototype

Application that producers 3D audio from 2D mono audio samples and a graphical user interface.

3D Audio Producer

pablo-antonio-camacho-jr Pablo Antonio Camacho Jr.

View all

Bits