0%

0%

Acathla (Fabien)

Electronics

Paris, France

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/08/2016.

My Projects

Cheap 16 bit parallel flash programmer with an arduino, two counters CD4040, one shift register 74164

MX29F1615 programmer

Acathla (Fabien)

Projects I Like & Follow

The 2016 Hackaday Prize

Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.

ODrive - High performance motor control

oskar-weigl Oskar Weigl

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

The 2016 Hackaday Prize

My attempt at making an FPGA experimenters board in a popular form factor :)

'Flea Ohm' FPGA Project

valentin-angelovski Valentin Angelovski

Kame is a quadruped robot with 8 servos and an ESP8266

Kame, ESP8266 based quadruped

javier-isabel Javier Isabel

A Pi emulating a GameBoy sounds cheap. What about an FPGA?

VerilogBoy - GameBoy on FPGA

wenting-zhang Wenting Zhang

The 2017 Hackaday Prize

Low-cost, open-source FPGA boards in a tiny form factor with built-in USB, SPI flash, LDO, and MEMS clock.

TinyFPGA B-Series

luke-valenty Luke Valenty

Hackaday Prize 2019

An open-source Arduino compatible remote controller (transmitter) with many customization options for robots and drones.

Alpha V1: Open-Source Remote Controller

alireza-safdari alireza safdari

Hackaday Prize 2019

University digital Logic Learning Xtensible board release 3 with SDRAM

ULX3S powerful ECP5 board for open source FPGA

radionaorg radiona.org

Hackaday Prize 2020

Augmenting materials with electrical properties ⚡⚗️

PolySense

cedric-honnet Cedric Honnet

Tiny board with a BIG FPGA. SD card, 64mbit DDR RAM, ECP5 FPGA, 64mbit flash, and micro USB. Do more with up to 45k LUTs.

TinyFPGA E-Series

luke-valenty Luke Valenty

The 2018 Hackaday Prize

CD-ROM Optical Pickup Unit (OPU) used for homemade scanning laser microscope

Scanning laser microscopy made by CD-ROM OPU

roland-varga Roland Varga

In this project I make my own brushless motor controller to implement several commutation strategies all the way to field-oriented control.

DIY Field-Oriented Control ESC

The 2018 Hackaday Prize

fRISCy combines SiFive's new RISC-V microcontroller with a Lattice iCE40 FPGA for a platform that is all open source!

fRISCy: FPGA + RISC-V Digital Processing Board

stephen-newberry Stephen Newberry

Produce a working Wozniak design blue box

WoZ Bluebox hardware recreation

cprossu cprossu

Chips want to be free

Chips4Makers Pilot: Retro-uC

staf-verhaegen Staf Verhaegen

Reverse engineering approach to reuse LVDS LCD panel with use of the FPGA

LVDS LCD Hacking with FPGA

martin-hub Martin Hub

The 2018 Hackaday Prize

I'm using modern tools and methods to implement a very fast FHP3 binary model on your desktop

2D Flow simulations with Lattice Gas Automata

yann-guidon-ygdes Yann Guidon / YGDES

The 2018 Hackaday Prize

I want to modify a Roland RD1000 and turn its keyboard to full pressure sensitivity

RD1000 mod

yann-guidon-ygdes Yann Guidon / YGDES

View all

Bits