0%

0%

Aniket Kandalkar

I am a researcher who likes to explore, tinker with things and play with machines. By profession, I am a Biotechnologist.

India

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 02/13/2022.

My Projects

Optical mouse-based seismometer

Seis-mouse-meter

aniket-kandalkar Aniket Kandalkar

3D-printed Interface to connect pinout of potentiostat to screen-printed electrodes

Interface for the potentiostat

aniket-kandalkar Aniket Kandalkar

Projects I Contribute To

2021 Hackaday Prize

Hack an optical mouse to detect seismic vibrations with a simple laser source, a hacked mouse lens and a physical cantilever arm setup.

Low-cost seismograph using optical mouse

subir-bhaduri Subir Bhaduri

Projects I Like & Follow

Sofware usb host for connecting mouse , keyboard and joystick to ESP32

ESP32 usb software host

samsonov-dima Samsonov Dima

Hackaday Prize 2019

Loko is the 12 gram GPS tracker with extreme battery life.

Loko-Offline GPS tracker with 270 days battery

akio-sato Akio Sato

Getting Marlin to run on the Monoprice Mini/Malyan M200.

Monoprice Mini Marlin 2.0 Support

jc-nelson J.C. Nelson

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

Run Stremio on Raspberry Pi with a kiosk look

Install Stremio on Raspberry Pi

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

The 2018 Hackaday Prize

diy direct-drive extruder 3D printer running Klipper firmware

protoDEV 3d printer

michal-wojciechowski Michal Wojciechowski

Build a COVID-19 shield with a device that estimates skin temperature and indicates if a person might have a fever.

Skin Temperature Scanner

gilbert-franois Gilbert François

A sleeker case for the bulky BMW proximity key fob.

3D print a thinner car key

Create a 1971 VertiBird toy with a modern TWIST!

VertiBird Redo

luke-j-barker Luke J. Barker

The 2018 Hackaday Prize

Self-Powered IoT Node for Environmental Sensing

SPINES Mote

Universal Arduino Wireless Shield

RadioShield

jan-grome Jan Gromeš

A study for a simple pick-and-place head using a servo and an injection needle instead of a hollow-shaft stepper motor and a standard nozzle

simple pick-and-place head

michael-mayer Michael Mayer

TIRO (Time is Running Out) is a watch that vibrates every few minutes to remind the user that time in this world is quickly running out.

TIRO Vibrating Watch

AccidentalRebel

-

Combine two DJI FPV goggles into a single pair of stereoscopic FPV goggles.

3D FPV Goggles

nathan-peterson Nathan Peterson

how to setup Phabricator on a raspberry pi 3B+ with a RAID on usb sticks to store the data somewhere else than on the SD card

Phabricator on raspberry pi

nathann Nathann

By wiring simple electrical components like relay, neon bulb and a 9V battery, back emf from the relay can be used to light the bulb.

Glow a neon bulb using 9V DC battery and a relay!

View all

Bits