0%

0%

Muhomor

DIY Nerd

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/07/2019.

My Projects

My homebrew nixie project. All as you like - ESP32, one button, internet synchronization, and, of course - web page for settings.

ESP32 Nixie Clock

Hackaday Prize 2019

Sensor as no case solution

Usb WiFI temerature sensor

Projects I Like & Follow

Hackaday Prize 2019

High Power, High Performance 400V 300A 100+kW Motor Controller fully compatible with VESC®

Axiom: 100+kW Motor Controller

The 2018 Hackaday Prize

A low cost ESP32 core board with Ethernet and PoE for convenient "single cable" deployments

wESP32: Wired ESP32 with Ethernet and PoE

patrick-van-oosterwijck Patrick Van Oosterwijck

Hackaday Prize 2020

Pocket sized ESP32 display board with 180µW Always On Display and Gyro Controls

Low Power ESP32 Handheld

Open-source wire bending CNC machine for wires at 1mm and less in diameter.

Precise Wire Bending Machine

ji-praus Jiří Praus

Hackaday Prize 2019

A multimeter, based on the STM32F373, which can measure voltage, current and power (both bipolar and DC or true RMS with multiple ranges).

STM32 Open Source Multimeter

Hackaday Prize 2019

Simple DIY Vertical axis wind turbine

Simple VAWT wind power generator

A plug-in ESP8266 to ASK/OOK RF module for controlling simple RF devices over WiFi

ESP433: WiFi to 433MHz bridge

kurt-kiefer Kurt Kiefer

Hackaday Prize 2019

Not your granddad's Geiger Counter

DIY Scintillation Detector

alex-lungu Alex Lungu

A custom vacuum tube pre-amplifier featuring remote control and a nixie tube volume level display

Vacuum Tube Preamplifier with Nixie Display

justin-scott Justin Scott

Clock that chimes on the hours, halves, quarters

Chiming Clock

Dial indicators are common measuring instruments in the machine shop and are often referred to as clocks. Can they tell time too?

Dial Indicator Clock

2021 Hackaday Prize

A mostly 3D printed automated cat feeder (part of my SCADA)

IoT cat feeder

stefanschnitzer stefan.schnitzer

Ultrasonic distance monitoring using HC-SR04 sensor, Arduino WiFi and AskSensors IoT cloud

Distance monitoring with Arduino & AskSensors IoT

The 2018 Hackaday Prize

We have made a $50 Bacteriological Incubator that can be used in order to grow microorganisms

Low Cost Bacteriological Incubator

shreyasvi-natraj Shreyasvi Natraj

Buck boost regulator module that supports 3.5V-24V input, charging 1-4 cell batteries, and programmable output from 4.48V to 20.8V

BQ25703A Programmable Regulator Module

alex-klimaj Alex Klimaj

A clock with 5 hands to show Time and Date

CalendarClock

michael-mller Michael Möller

I want to keep track of how much propane I use to heat my shack. So I'm building an IoT scale to keep track of the weight of my tanks.

Propane and IoT Propane Accessories

dan-maloney Dan Maloney

Hackaday Prize 2020

A two-wheeled, Segway-like, machine that can carry human load and works on the principle of inverted pendulum.

Two-wheeled Self-balancing Human Carrier

anas-raza-khan Anas Raza Khan

View all

Bits

Patrick Van Oosterwijck wrote 09/05/2019 at 17:19

Thanks for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE project!

Are you sure? yes | no

Muhomor wrote 09/05/2019 at 17:22

Thank you, Partick! Its really intresting and helpful work!

Are you sure? yes | no