0%

0%

Tom

Entrepreneur | Engineer | Consultant | Professional Game Developer | Maker

Texas

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/22/2021.

My Projects

Homebrew Retro-Inspired 32-bit CPU And Video Game System

Project Ember

Projects I Like & Follow

Supplyframe DesignLab: 2023 Hackada…

Open-Source Infrared Remote Using ESP32 and LVGL

OMOTE - DIY Universal Remote

After three years... Supercon again! And the new badge too!

BADGE FOR SUPERCON.6 / November 2022

voja-antonic Voja Antonic

PCB linear motors offer a different approach to powering tiny scale model trains, cars, boats, etc.

PCB Linear Motors for Model Trains

The multi-channel power supply (5 Channels up to 100W) solution designed to transform a standard USB port into a flexible energy source.

Fusion USB PD Power Box

Supplyframe DesignLab: 2022 Hackada…

Saving the planet, one obsolete chip at a time

ABN6502 SBC R1

anders-nielsen Anders Nielsen

Supplyframe DesignLab: 2023 Hackada…

6502 based learning in a familiar form factor

65uino

anders-nielsen Anders Nielsen

Want a piece of RISC-V hardware to play with, but are concerning with the price? Why not build one by yourself with a cost less than 10$!

The Cheapest RISC-V 64 Computer (by Now)

What, you're using a 555? I could've done that with a microcontroller!

ATTiny555

shranav-palakurthi Shranav Palakurthi

Reading up to 9 XIaomi Mi Temperature and humidity sensors using nodeRed+Bash+gatttool

Reading a bunch of BLE sensors with raspberryZero

A Microprocesser designed in a digital logic family based on the NE555

555ENabled Microprocessor

A Waveform analyzer, Signal generator and logic tester in a small PI PICO. With a dedicated application, Runs on Android.

Raspberry Pi Pico 200Khz Digital Oscilloscope

sagar-001 Sagar 001

HBC-56 A homebrew 8-bit computer with a backplane. Initially with a 65C02 CPU card, a TMS9918A VDP and dual AY-3-8910 audio.

HBC-56: 65C02 + TMS9918A on a backplane

troy-schrapel Troy Schrapel

Creating a complete working retro 16-bit computer from scratch in the style of the C64, CPC 464 and alike using an FPGA

The Moncky project

An attempt to make an RC2014 module that emulates the TMS chip, with crisp DVI output and some additional RC2014 functionality

Emulated TMS9918A using RP2040/DVI

2021 Hackaday Prize

Complete 6502 single board computer with 50x29 lines "VGA" output and PS/2 input

ABNielsen.com 6502 SBC r0

anders-nielsen Anders Nielsen

DIY Badge for Remoticon.2

Remoticon 2 badge

thomas-flummer Thomas Flummer

Replace your old alarm system panel with a new board with up to 42 zones that will integrate with Home Assistant

ESP32 Replacement Alarm Panel for Home Assistant

A programable and wearable electronic name badge that scrolls a name over several LED matrixes.

Hello, my name is: a wearable name badge

madison Madison

View all

Bits

Yann Guidon / YGDES wrote 02/05/2022 at 02:03

Welcome to the club Tom ! Maybe you'll want to have a look at #PDP - Processor Design Principles

Are you sure? yes | no

Tom wrote 02/11/2022 at 03:02

This is great stuff, I read through quite a bit of the list. I'll have to check out some of the designs. thx for the heads up!

Are you sure? yes | no

Dusan Petrovic wrote 01/26/2022 at 16:02

Hi Tom, thank you for following the #Homebrew CPU list!

Are you sure? yes | no

Tom wrote 01/26/2022 at 19:40

;) wish I had seen it sooner, an awesome list, I have to go through and look at all those projects now...

Are you sure? yes | no