Close
0%
0%

Silas Waxter

Currently working on a medical device that uses two IMUs and Bluetooth to measure the range-of-motion/flexibility of a joint.

Corvallis, Oregon
Following
Send a private message
Similar accounts worth following
1 Followers
33 Following
4 Projects
8 Likes
silas-waxter
Send a private message

This user joined on 10/07/2019.

0
0
1
A Windows Forms user-interface for the range of motion device I'm developing
Project Owner Contributor

Range of Motion Device (Prototype)

silas-waxterSilas Waxter

317
8
0
5
Regulate humidity and air exchange in a plastic bin.
Project Owner Contributor

Automated Mushroom Fruiting Container

silas-waxterSilas Waxter

952
2
0
1
A servo-powered deadbolt attached to a rack-and-pinion based design, which locked to the lander and lifted the robot off of the ground.
Project Owner Contributor

Lift and Lock Mechanism | FTC Robot (2018-2019)

silas-waxterSilas Waxter

180
217
1
1
A custom hardware abstraction layer for the STM32L4xx microcontroller.
Project Owner Contributor

STM32L4xx Hardware Abstraction Layer

silas-waxterSilas Waxter

28.6k
7.9k
17
199
Micro Smart LiDAR Sensor
Project Owner Contributor

MappyDot

bleckyBlecky

21.3k
6.6k
16
139
Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.
Project Owner Contributor

3D scanner

jolarJolar

19.3k
3k
16
53
This is a fast, heavy-duty Pulse Engine derived from my Commercial grade desulfator. Up to 80% battery yields overnight.
Project Owner Contributor

Battery Desulfator Kit, TESLA 12V compatible

mosaicmercmosaicmerc

15.8k
1.4k
27
67
A WiFi fidget spinner, taken from concept to ordering parts in one weekend
Project Owner Contributor

IoT POV Fidget Spinner

matthiasMatthias

14.3k
100
23
61
Super-small, ultra-low-power 96 MHz Cortex M4F co-processor manages sensors and processes data allowing the MCU host attend to other things.
Project Owner Contributor

MAX32660 Motion Co-Processor

kris-winerKris Winer

13.3k
6.5k
12
49
A fully hardware debounced rotary encoder.
Project Owner Contributor

Hardware Debounced Rotary Encoder

tonyTony

13.1k
6k
8
19
The 567 tone decoder is perhaps most famous Phase Locked Loop (PLL) chip. This project looks at an Arduino software PLL.
Project Owner Contributor

Software Phase Locked Loop

agpcooperagp.cooper

12.3k
2.7k
5
59
A quick and dirty antenna to save me buying Yet Another Dongle just to get Bluetooth in my garden. Also works with WiFi dongles...
Project Owner Contributor

Bluetooth & WiFi Antenna Upgrade

morningstarMorning.Star

12.3k
6.8k
0
15
Expansion boards are designed to be easy to use in DIY IoT projects, low cost, reliable, saves the pain of cabling bread boards
Project Owner Contributor

STM32 Blue pill IoT expansion boards

wassimWassim

10.7k
2.8k
9
19
Reverse Engineering Bluetooth Data
Project Owner Contributor

Bluetooth Data Owon B35T Multimeter

alain-mauerAlain Mauer

5k
5.2k
9
44
A controller for all your IoT needs.
Project Owner Contributor

ESP IoT Controller

jeremiasJeremias

4.9k
616
14
123
A project for the people suffering from tremor,this device can be used to analyze the tremor frequency and stabilize it by using a gyroscope
Project Owner Contributor

Analysis and control of hand tremor

mohammedzeeshan77mohammedzeeshan77

2.8k
2.9k
0
12
Remote control web interface with live video for Raspberry Pi Robots
Project Owner Contributor

STS-PiLot Robotics Remote Control

mark-dammer-mm0dqmMark Dammer MM0DQM

2.6k
2.6k
0
22
The smallest DIL40 8085-based computer
Project Owner Contributor

SDC_85

gbmgbm

1.6k
1.6k
3
20
A robot fish with pcb fins
Project Owner Contributor

Robot Fish (PCB Fins)

carl-bugejaCarl Bugeja

1.6k
1.6k
0
6
Configure your light switches with Bluetooth LE
Project Owner Contributor

Software Defined Lighting

kevin-kesslerKevin Kessler

1.4k
1.2k
4
14
3D printed ball screw actuator focusing on minimal cost.
Project Owner Contributor

3D Printed Ball Screw Actuator

jeffJeff

1.2k
512
0
7
Control a robot with the twist of a wrist.
Project Owner Contributor

Palm Power!

dennisDennis

View all

Share this profile

Share

Bits

Kris Winer wrote 01/02/2020 at 01:04 • point

Thanks for following my MAX32660 Motion Co-Processor project!

  Are you sure? yes | no

Send a private message to Silas Waxter

Become cool instantly

Create your Hackaday.io profile like Silas Waxter and many others

By using our website and services, you expressly agree to the placement of our performance, functionality, and advertising cookies. Learn More

Report user as inappropriate

You are about to report the user "Silas Waxter", please tell us the reason.