0%

0%

Silas Waxter

Currently working on a medical device that uses two IMUs and Bluetooth to measure the range-of-motion/flexibility of a joint.

Corvallis, Oregon

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/07/2019.

My Projects

A Windows Forms user-interface for the range of motion device I'm developing

Range of Motion Device (Prototype)

silas-waxter Silas Waxter

Regulate humidity and air exchange in a plastic bin.

Automated Mushroom Fruiting Container

silas-waxter Silas Waxter

A servo-powered deadbolt attached to a rack-and-pinion based design, which locked to the lander and lifted the robot off of the ground.

Lift and Lock Mechanism | FTC Robot (2018-2019)

silas-waxter Silas Waxter

A custom hardware abstraction layer for the STM32L4xx microcontroller.

STM32L4xx Hardware Abstraction Layer

silas-waxter Silas Waxter

Projects I Like & Follow

The 2017 Hackaday Prize

Micro Smart LiDAR Sensor

MappyDot

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

The 2018 Hackaday Prize

This is a fast, heavy-duty Pulse Engine derived from my Commercial grade desulfator. Up to 80% battery yields overnight.

Battery Desulfator Kit, TESLA 12V compatible

The 2017 Hackaday Prize

A WiFi fidget spinner, taken from concept to ordering parts in one weekend

IoT POV Fidget Spinner

Super-small, ultra-low-power 96 MHz Cortex M4F co-processor manages sensors and processes data allowing the MCU host attend to other things.

MAX32660 Motion Co-Processor

kris-winer Kris Winer

A fully hardware debounced rotary encoder.

Hardware Debounced Rotary Encoder

The 567 tone decoder is perhaps most famous Phase Locked Loop (PLL) chip. This project looks at an Arduino software PLL.

Software Phase Locked Loop

agpcooper agp.cooper

The 2017 Hackaday Prize

A quick and dirty antenna to save me buying Yet Another Dongle just to get Bluetooth in my garden. Also works with WiFi dongles...

Bluetooth & WiFi Antenna Upgrade

morningstar Morning.Star

Expansion boards are designed to be easy to use in DIY IoT projects, low cost, reliable, saves the pain of cabling bread boards

STM32 Blue pill IoT expansion boards

Reverse Engineering Bluetooth Data

Bluetooth Data Owon B35T Multimeter

alain-mauer Alain Mauer

The 2017 Hackaday Prize

A controller for all your IoT needs.

ESP IoT Controller

The 2017 Hackaday Prize

A project for the people suffering from tremor,this device can be used to analyze the tremor frequency and stabilize it by using a gyroscope

Analysis and control of hand tremor

mohammedzeeshan77

The 2017 Hackaday Prize

Remote control web interface with live video for Raspberry Pi Robots

STS-PiLot Robotics Remote Control

mark-dammer-mm0dqm Mark Dammer MM0DQM

The smallest DIL40 8085-based computer

SDC_85

Configure your light switches with Bluetooth LE

Software Defined Lighting

kevin-kessler Kevin Kessler

A robot fish with pcb fins

Robot Fish (PCB Fins)

carl-bugeja Carl Bugeja

3D printed ball screw actuator focusing on minimal cost.

3D Printed Ball Screw Actuator

The 2018 Hackaday Prize

Control a robot with the twist of a wrist.

Palm Power!

View all

Bits

Kris Winer wrote 01/02/2020 at 01:04

Thanks for following my MAX32660 Motion Co-Processor project!

Are you sure? yes | no