0%

0%

TM

Dilettante nerd.

Boston

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/26/2014.

My Projects

Adding a Flask web interface (and other stuff) to the Google AIY Voice Kit.

VoiceBox

Accessing a web site with an ESP8266 serial WiFi module and an Arduino Mega 2560.

ESP8266 Retro Browser

Documenting the steps taken to build a new, clean, Linux development environment.

Setting up Linux AVR and ARM toolchains

Not sure whether to contact your loved one via email, SMS, Skype, WhatsApp or FB messenger? Just SHOUT - with a text-to-speech web server.

piHole - Raspberry Pi text-to-speech msg server

OpenSCAD scripts to print a customizable enclosure for the Atomic Pi single board computer.

Fallout Shelter - Atomic Pi Enclosure

Projects I Like & Follow

The WiPhone project is an open source mobile IP phone. WiPhone is intended to be hackable, modular, cheap, and open, while remaining usable.

ESP32 WiPhone

A Pi emulating a GameBoy sounds cheap. What about an FPGA?

VerilogBoy - GameBoy on FPGA

wenting-zhang Wenting Zhang

The 2018 Hackaday Prize

Building all the tools neccesary to make chips at home.

Semiconductors @ Home

The 2018 Hackaday Prize

A system designed to be easy to build and setup. Uses two $20 webcams and open source software to provide accurate eye tracking

Low Cost Open Source Eye Tracking

john-evans John Evans

A 16-bit (and a 32bit) FPGA CPU I call Lion CPU and a computer, the Lion computer. Everything built from scratch.

Lion FPGA CPU/Computer

It's a dumb terminal. You can connect a Raspberry Pi to it.

VT-69 Handheld Terminal

A high torque, high precision, Strain Wave Gear (harmonic drive) based 3D printable closed loop servo actuator for use in robotic arms

Open HD

sam-armstrong Sam Armstrong

Alternative for the 74LS181 ALU, built in One Square Inch

4 bit TTL ALU

Add a second brain to your Arduino Mega

RetroShield for Arduino Mega

Using a fully 3d-printed two-axis rotational stage, an arduino and a camera to produce accurate 3D Models

High Quality 3D Scanner (<100€)

The 2018 Hackaday Prize

The idea is to create a non convencional interface to control a robotic arm

Owi arm controlled by a LEAP Motion

giovanni-leal Giovanni Leal

Bat like sonar sensor that can track multiple targets and estimate angle of arrival using chirps and cross correlation in near real time.

Bat Sonar

filip-mulier Filip Mulier

The 2018 Hackaday Prize

This project has an intention to develop a haptic device that can control almost everything, it must be cheap, easy to build and implement.

[2018]Multipurpose modular haptic control

maximiliano-rojas Maximiliano Rojas

Build this small oscilloscope. Up to 40KHz (25uS) / 50mV-50V / gain 1-100 / AC-DC / auto-trig / free sweep / 9V operation.

Mini Oscilloscope

For people who want to focus on certain task, the Productivity Timer is a simple device that divides your time into well-defined blocks.

Productivity Timer (a.k.a. Pomodoro Timer)

Digital collectables made tangible. Bringing life to blockchain based creatures.

Cherishables

The 2018 Hackaday Prize

Remote controlled vehicle with two trailers is going reverse and steers automatically

Automatic reverse with two trailers

A not-quite-successful attempt at a closed-loop CNC plotter using DC motors and a Raspberry Pi.

Pi CNC Plotter Fail

daniel-james-evans Daniel James Evans

View all

Bits

Giovanni Leal wrote 08/25/2018 at 13:14

Hi TM!

thanks for the like. Check my latest project also, im sure you'll find it interesting.

https://hackaday.io/project/159728-pulse-sensor-to-actuate-a-robotic-hand.

Have a great day!

Are you sure? yes | no

roelh wrote 08/16/2018 at 06:29

Hi TM, thank you for following the 4-bit TTL ALU, https://hackaday.io/project/160506-4-bit-ttl-alu !

Are you sure? yes | no