Close

Recent Projects

A freeform brass wire sculpture featuring a round capacitive touch screen, 6-axis IMU auto-rotation, and reactive led filaments.
Project Owner Contributor

YUMO SMART CUBE: Touch screen/ESP32-S3 Brass Wire

yumobuildsYUMO.BUILDS

A hand-bent 1.5mm brass wire clock sculpture powered by ESP32-C3 with NTP time sync, hardware-multiplexed 7-segment display, and 5-stage SK
Project Owner Contributor

YUMO GLOBE

yumobuildsYUMO.BUILDS

Tiny ESP32-C3 desk gadget with OLED, live weather sensing, proximity glow & a phone-controlled web interface.
Project Owner Contributor

YUMO PULSE — ESP32-C3 Desk Gadget

yumobuildsYUMO.BUILDS

An ESP32-powered desk gadget with six round displays that appears to spin without any visible axle — the trick is mounting the frame on the
Project Owner Contributor

YUMO Roulette — A "Floating" Spinning Desk Gadget

yumobuildsYUMO.BUILDS

Corneal Topography Test in Miami | Advanced Eye Imaging
Project Owner Contributor

Corneal Topography Test in Miami

eyes-on-brickellEyes on Brickell

The project involves the development of an autonomous robotic system based on a 4-degree-of-freedom (4DOF) arm.
Project Owner Contributor

MeArm_Pick_Place

luca-fagioliLuca Fagioli

Open hardware and firmware that sit inline with a bench power supply, adding live measurement, protection, and SCPI control.
Project Owner Contributor

PSU-EXT

dzmitry-dydyshkaDzmitry Dydyshka

Satellite Systems Simulator | Open Source | Accurate | Fun
Project Owner Contributor

Space Systems Lab

arnav-vArnav V

Open-Source Music Exploration Terminal based on M5Stack TAB5(ESP32-P4).
Project Owner Contributor

M5MusicTab5

fangbrbrFangbrbr

Building a home hifi component from scratch was a very early dream. There was finally an excuse to do it.
Project Owner Contributor

Ultimate stereo amplifier

lion-mclionheadlion mclionhead

The G-EDM is an electrical discharge machine that supports sinker EDM, EDM engraving, EDM drilling and Wire EDM operations. #Drahterodieren
Project Owner Contributor

G-EDM

gedm-devgedm-dev

Reimplement the TED chip of Commodore 264 series in FPGA
Project Owner Contributor

FPGATED

istvn-hegedsIstván Hegedűs

A 1,216-parameter transformer written entirely in HyperTalk, trained overnight on a Macintosh SE/30.
Project Owner Contributor

MacMind: A Transformer Trained in HyperCard

seanSean

I am working on a compact embedded project that can monitor the condition and behavior of a rechargeable battery
Project Owner Contributor

Designing a Smart Battery Health Monitor

deenjamespkdeenjames.pk

Network Lab
Project Owner Contributor

Home_LAB

rhea-raeRhea Rae

Portable groove box that can be thrown in backpack, set up quickly and produce music on the fly.
Project Owner Contributor

Sample.Loop.Repeat

geraGera

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday