Close

Recent Projects

A hefty headlight for riding bumpy trails at night
Project Owner Contributor

Chunky MTB Headlight

colin-pateColin Pate

Keep your resin at the right temperature with this USB-PD powered vat heater featuring ESP32 control, dual channels, and fan support.
Project Owner Contributor

Vat Heater for Resin 3D Printers

dimitarDimitar

Reliable high-altitude tracking system using the Horus Binary v2 protocol
Project Owner Contributor

Tiny4FSK

max-kendallMax Kendall

A robust 45A ESC featuring the WCH CH32M007 RISC-V MCU for FOC/BLDC motor control.
Project Owner Contributor

A RISC-V Powerhouse: Open Source 45A ESC Uses CH32

rmingonrmingon

A project I put together to make a gift I received even more useful
Project Owner Contributor

Heated Sock Controller

zachary-murtishiZachary Murtishi

Exploring RF only LoRa mesh behavior using Lily Go and other various Mesh and Non Mesh devices.
Project Owner Contributor

LoRa

rhea-raeRhea Rae

After 7 years, the project is still very much alive!
Project Owner Contributor

WEEDINATOR 2026

goat-industriesGOAT INDUSTRIES

The WEEDINATOR is back!
Project Owner Contributor

WEEDINATOR 2025

goat-industriesGOAT INDUSTRIES

This is the second version of my electronic load, it has a PID controller and web interface, we can control the load digitally upto 30W.
Project Owner Contributor

I Made a 30W Digitally Controlled Electronic Load

sagar-001Sagar 001

A 400W reflow hot plate that abandons PID for a custom inertia-aware algorithm to prevent overshoot.
Project Owner Contributor

HEAT: Heater for Electronic Assembly & Testing

danielDaniel

Create a series of boards designed for the RC2014 bus to achieve MSX/MSX2 compatiblity
Project Owner Contributor

MSX COMPATIBLE BOARDS FOR RC2014

dean-nethertonDean Netherton

Pi Zero 2w mini DLNA Server for use on home wifi or as a wifi access point to stream media from
Project Owner Contributor

Pi Zero 2w Mini DLNA Server

diddydiddy

inductively-coupled radiofrequency plasma toroid in xenon gas
Project Owner Contributor

Plasma Toroid (sky-guided PCB edition)

sky-guidedsky-guided

An experimental haptic speaker built from a Nautilus shell, documenting unexpected acoustic behavior observed during a hands-on maker projec
Project Owner Contributor

Steampunk Nautilus - A Shell-Based Haptic Speaker

hide-keyhide-key

SRAM Emulator and SD Card Interface for Vintage Single Board Computers (such as the Heathkit ET-3400, Lab-Volt 6502, and Microprofessor)
Project Owner Contributor

PicoRAM Ultimate

michael-wesselMichael Wessel

To create delicious BBQ using 2 k-type thermocouples, the Arduino MKR1010 and MAX6675 digital converters, which publishes over local WiFi.
Project Owner Contributor

MQTT BBQ and Smoker Thermometer

alexander-andrew-antounAlexander Andrew Antoun

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday