Close

Recent Projects

A low cost robotic hand for robots and humans
Project Owner Contributor

Yeah Robotic Hand (formerly Rebelia)

vittorio-lumareVittorio Lumare

The aim is to create a 4 blade savonius wind powered generator
Project Owner Contributor

Savonius 4-blade design

alanpassmorealanpassmore

·2-Imploturbocompressor, State of the Art Novel InFlow Tech. Impulse Turbine, ·Implo-Ducted, 1 Moving Part Type, One Compression Step
Project Owner Contributor

IMPLOTURBOCOMPRESSOR Impulse Turbine 1 Comp Step

carlos-barreraCarlos Barrera

An easy to make extension to the vintage CP/M portables from Epson
Project Owner Contributor

120 kByte RAM Disk for the Epson PX-4 and PX-8

fjkraanfjkraan

State of the Art Novel Rotary Turbo InFlow Top Tech / ·1-GEARTURBINE Reaction Turbine Rotary Turbo Retrodynamic Effect Ying Yang Power Way
Project Owner Contributor

GEARTURBINE Reaction Turbine Rotary-Turbo YingYang

carlos-barreraCarlos Barrera

This is another camera body based on Raspberry Pi HQ Cam
Project Owner Contributor

Another camera JDC34

jacob-david-c-cunninghamJacob David C Cunningham

Is it possible to + physically apply Newton's third law of motion as a dynamic cycle system in a motor device in a positive way.
Project Owner Contributor

It Can Apply the Newton III Law on an EngineSystem

carlos-barreraCarlos Barrera

this box will provide 8.4V 20A for big RC plane power with 2s lipo receivers and servos
Project Owner Contributor

Power box for big RC plane

jp-gleyzesJP Gleyzes

Jumperlink is a board designed to make electronic connections easier to set up, maintain, and share compared to traditional jumper wires.
Project Owner Contributor

Junperlink: A Smarter Way to Connect Electronics

dylan-zhengdylan zheng

Connect 1980s computers (MSX, CP/M, C64, Apple II) to Claude AI via WiFi. ESP32 MCP bridge brings modern intelligence to vintage machines.
Project Owner Contributor

Bridge Across Decades

nishioka-sadahikoNishioka Sadahiko

Running OpenHamClock in a dedicated kiosk mode on the Banana Pi M4 Zero SBC.
Project Owner Contributor

OpenHamClock Kiosk

dilshan-jayakodyDilshan Jayakody

4 x Multi purpose power outputs, controlled via TWI commands
Project Owner Contributor

TWI to 4 x PWM Driver

phil-weaselPhil Weasel

Celebrating 50 years of Tiny Basic by implementing a custom micro-coded 16/32-bit CPU that executes it directly (up to 100MHz)
Project Owner Contributor

CPU running Basic

zpekiczpekic

Project documenting the build of a penetrating device running Bruce Firmware
Project Owner Contributor

Brucey

rhea-raeRhea Rae

Play your favorite songs using a custom mini electronic keyboard that lights up the notes!
Project Owner Contributor

Mini Piano Tutor

ritali-jainRitali Jain

To start using your Cricut machine, go to cricut.com/setup. Visit: https://mycricut-design-app.com
Project Owner Contributor

cricut setup

cricut-createcricut create

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday