0%

0%

vincent stuchly

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/15/2018.

My Projects

This blinky badge is ideal place to start with SMD components, PCB design and manufacturing

"Get into SMD" badge

vincent-stuchly vincent stuchly

Prototype of geiger counter with small dimensions.

Mini Geiger counter with oled screen

vincent-stuchly vincent stuchly

Let's send geiger counter to the stratosphere!

Geiger counter for stratosphere

vincent-stuchly vincent stuchly

Projects I Like & Follow

Minimal SDR receiver for MW/LW/SW bands

Pi Pico Rx

The aim of this project is to make high grade DIY or turnkey AFM.

Atomic Force Microscope - from ground up

Quasi Scientist

A complete low-power gamma ray spectrometer that can be used by itself or integrated into other projects

Pomelo: Gamma Spectroscopy Module

mihaicuciuc mihai.cuciuc

Like a HP-200LX but better - because 6502

ESP65 Pocket Computer: KIM-I/Apple-1/esp32

Rogowski coil current sensor using cheap shunt regulators as opamps.

TL431 rogowski coil current sensor

A 12-bit bit-serial single-board discrete transistor computer.

Q2 Computer

joe-wingbermuehle Joe Wingbermuehle

Measuring radioactivity without need of Geiger tube.

Nuclear radiation sensor with photodiode detector

robert-gawron Robert Gawron

This is a project where I built a sputtering magnetron to deposit thin conductive films on surfaces.

Sputtering Magnetron

steve-hernandez Steve Hernandez

Another take on a DIY Geiger Counter, capable of alpha, beta and gamma detection, in a 3D printed enclosure.

Geiger Counter

dan-julio Dan Julio

2021 Hackaday Prize

Print metal just like plastic.

Semisolid Metal Printing

michael-perrone Michael Perrone

A software written in Python than detect contours on images and converts them to SVG or creates G-code for 3D printers

Image to SVG and G-code converter

WSPR beacon of shortwave band, based on Raspberry Pi Pico. No additional HW is required. The RF is generated by software!

Raspberry Pi Pico-based WSPR beacon

roman-piksaykin Roman Piksaykin

Radio telescope design and build project

H1 Radio Telescope

An addressable LED based on discrete transistors

The TransistorPixel

A 1:1 scale flying model of the Mars helicopter

Mars Ingenuity Helicopter

nick-rehm Nick Rehm

Receiving 1.7GHz HRPT signals from NOAA satellites

Dish Rotator for NOAA images

Using filament and/or metallic resin and then casting if I get really desperate. Basically just trying to print metal

Bound metal deposition printing at (lab)

ahron-wayne Ahron Wayne

my progress with vacuum systems experiments

vacuum

View all

Bits

mihai.cuciuc wrote 04/24/2024 at 20:29

Hi, Vincent! Thanks for your interest in #Pomelo: Gamma Spectroscopy Module! Congrats on your high altitude balloon test!

Are you sure? yes | no

Bharbour wrote 04/09/2021 at 13:51

Thanks for liking and following my project #Does Beer Cool Down Faster in a Can Than a Bottle

Are you sure? yes | no

Patrick LeBoutillier wrote 01/16/2021 at 19:20

Thanks for following #But How Do It Know? 8-bit CPU Build !

Are you sure? yes | no