0%

0%

Rod Kimmell

Happily retired after a lifetime in the semiconductor industry and midnight engineering projects.

Oregon

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/16/2022.

My Projects

A couple of 3D printable Supercon 6 Badge holders

Supercon 6 Badge Holders

Projects I Like & Follow

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

Hackaday Prize 2019

Very new chip by Microchip(Atmel) ATmega4809 has a very unique CPLD like logic and also promised to be applied to next Arduino, why not try!

ATMega4809 developing board project

Get high-resolution 3D printing by building your own.

Laser SLA 3D printer with galvo

mark-peng Mark Peng

The 2018 Hackaday Prize

Rover is a big four wheel drive 3D printed robot you can make at home. It's CC0 open source, so anyone can use it.

Rover V2 four wheel drive robot

Simple analog Sanitiser Dispenser (No-Contact) using 555 timer IC with auto cut-off timer (even with trigger). Cheap and No-Coding Solution.

555 Sanitizer Dispenser (With cut-Off)

We are going to create an AC Voltage Measuring Device using Arduino, which will estimate the voltage of Alternating Current.

AC Voltmeter using Arduino

hiotron hIOTron

An OS boot selector switch based on the Pimorini Tiny 2040

Tiny 2040 Hardware Boot Switch

william-somsky William Somsky

2x3/2x5 IDC 2.54mm, 2x3 Pogo pin 1.27/2.54mm

AVR-ISP Pogo Pin Adapters

Citizen science project with mobile and fixed sensors for measuring air quality using low-cost sensors and smartphones

CanAir.io Air Quality Network

ArduinoGotchi is a real Tamagotchi P1 emulator running in Arduino UNO hardware

ArduinoGotchi

gary-kwok Gary Kwok

A really simple CAN network protocol for up to 30 nodes.

CAN Simple (protocol)

Development Board for the new ATmega4808 Series of AVR Microcontrollers

ATmega4808 Development Board

stefan-wagner Stefan Wagner

Six "sided" LED Randomizer a.k.a. an electric die

Hexo

thomas-countz Thomas Countz

Track lateral and vertical movements of a 3D printer via AprilTags. Then, get informed of malfunctions related to motion via Telegram.

IoT 3D Printer Motion & Status Tracker w/ Telegram

kutluhanaktar kutluhan_aktar

A diy wide angle lens for my reflex camera

Lens for a reflex camera

IoT-based Home Automation with Arduino IoT Cloud & Alexa using ESP32 to control 4 home appliances with voice commands. (Circuit + Code)

Arduino IoT Cloud ESP32 Alexa Control Smart Home

A clock is a counter. This is a counter made into a clock. It counts one second at a time, until it needs to count faster to catch up

Intuitive Counter Clock

Modbus Display (Software)

hasan-kara hasan kara

View all

Bits