0%

0%

Stanislav Britanishskii

robotics software engineer

Stuttgart, Germany

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 09/17/2025.

My Projects

Cheap 3D-printed robot dog: 14-DOF ESP32 quadruped with wobbly first steps, jittery servos and lots of room for hacks at around ~100€.

RoboDog

stanislav-britanishskii Stanislav Britanishskii

DIY 3D-printed manipulator from off-the-shelf parts and random steppers, ESP32-based control with a simple API over USB, Bluetooth and WiFi.

RoboArm: Yet Another 3D-Printed Manipulator

stanislav-britanishskii Stanislav Britanishskii

Projects I Like & Follow

Hackaday Prize 2019

Portable Power Platform for Pi Zero

PiSugar Battery for Raspberry Pi zero

Hackaday Prize 2019

A low-cost, high-performance bipedal walking robot

Blackbird Bipedal Robot

A Raspberry Pi internet world radio receiver

Raspberry Pi World Radio

abraham-martinez-gracia Abraham Martinez Gracia

The 2017 Hackaday Prize

This project focuses on using building a budget powder bed 3d printer capable of printing bones, and creating the needed ink and powder.

Printing bones on a DIY powder bed 3d printer

The 2017 Hackaday Prize

Creating a four legged robot with a running bound gait.

Mr. Runner

alex-martin Alex Martin

How to share a USB key and make a backup of a Dongle?

Share a USB dongle - Software Solution

How to design your own HAT module including ID EEPROM.

Designing a Raspberry Pi HAT

jon-buford Jon Buford

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

irene-wolf Irene Wolf

Setup MetaTrader on your ARM device and an automated trading robot for Forex

MetaTrader 4 on Raspberry Pi or any other ARM

The 2018 Hackaday Prize

Chapter 1 : Raspberry Pi Zero W Stepper Motor Module Balancing Robot and 3d Printer - CNC Machine

Raspberry PI Module for Robotics Mythololgy (1)

reginald-sourn Reginald Sourn

The 2018 Hackaday Prize

diy direct-drive extruder 3D printer running Klipper firmware

protoDEV 3d printer

michal-wojciechowski Michal Wojciechowski

Wheeled biped robots with fully open source hardware and software.

Upkie wheeled biped robots

upkie-wheeled-bipeds Upkie wheeled bipeds

The 2016 Hackaday Prize

Eliminate belts, pulleys, leadscrews.

linear stepper motor 3d printer

This Gopro hack allows wired control for robotics applications, using any microcontroller, without break or damage the buttons

Gopro Hero 4 wired control

2021 Hackaday Prize

One of my most advanced projects to date. A tracked robotic development platform that [hopefully] raises the bar for hobby robotics.

Autonomous tracked robotic platform UGV

maximiliano-palay Maximiliano Palay

a 3D-printed, affordable (~$10) AND functional dodecahedron speaker. This build can be modified for varying background knowledge/skill.

3D Printed Dodecahedron Speaker

olivia-heui-young-park Olivia Heui Young Park

Hackaday Prize 2020

Happy Prototyping powered by iOS

Codaic

oliver-herklotz Oliver Herklotz

DIY RGB LED lamp with glass brick/block and ESP32

LIGHT BLOCK- Smart Lamp

arnov-sharma Arnov Sharma

View all

Bits