0%

0%

Edoardo

Hi everyone! I'm an Italian engineering student passionate about electronics and developing solutions to combat climate change.

Italy

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 05/15/2023.

My Projects

The idea behind this project was to create a device easily reproducible for measuring air pollution with ESP32 and a live dashboard.

Air Quality ESP32: Build a Portable IoT Sensor

edoardo Edoardo

Projects I Like & Follow

All Sky meteorite camera build under 150$.

Cheap All Sky camera project with Raspberry Pi

he arrival of small satellites that used LoRa for telemetry data has meant that less technically qualified persons, with a very low budget,

Ground station for LoRa satellites

alberto-nunez alberto nunez

Quick way to start with MCUs

Adventures with a STC89C52 development board

ken-yap Ken Yap

DIY Skirt with 120 Neopixel LEDs and motion detection

Neopixel LED Skirt

A functional 3D printable full body exoskeleton - Passive concept development

3X0 - 3D Printable exoskeleton concept

andrea-piccinno Andrea Piccinno

We are going to create an AC Voltage Measuring Device using Arduino, which will estimate the voltage of Alternating Current.

AC Voltmeter using Arduino

hiotron hIOTron

Combine an ultrasonic ranging sensor with some addressable LEDs to help position your car in the garage with accuracy

ESP32-based Precision Parking Assist

Adventures with an Ender 3

How to win at 3D printing

lion-mclionhead lion mclionhead

This BTTF remote control has working speed via wireless transmission from the speed box.

Back-to-the-Future Remote Control Build

w-jason-altice W. Jason Altice

Building a sweet little shoulder dragon to accompany my Color Stealing Fairy project.

Nova - A Companion Bot

angela-sheehan Angela Sheehan

Combine two DJI FPV goggles into a single pair of stereoscopic FPV goggles.

3D FPV Goggles

nathan-peterson Nathan Peterson

Spin the knob to browse 5,000+ genres of music along with your own playlists. Knobby is a distinctive remote control for Spotify and more.

Knobby: a little remote, a lot of possibilities

milo-winningham Milo Winningham

A scale model of the Italian COSMO-SkyMed satellite brought to life with the addition of a small flashing light.

Flashing satellite model

andrea-console Andrea Console

We are talking about the reinforcement of printed parts. I plan to reinforce the part during printing with a fiberglass paint mesh.

Reinforcement with fiberglass mesh in 3d printing

ISP and UPDI Combo Programmer for AVR Microcontrollers

CH552 picoAVR ISP+UPDI Programmer

stefan-wagner Stefan Wagner

Compact Quadruped Robot Project (Open Source)

LOTP Robot Dog V1

limenitis-reducta Limenitis Reducta

In this Internet of Things project, I have shown how to make the IoT-based water pump controller using ESP32 Blynk & float sensor switches.

IoT Based Water Level Controller Using ESP32 Blynk

This project aims to design a generic robotics platform which can be cheaply produced and used in STEM programs and also in swarm robotics.

Low Cost Multipurpose Robotics Platform

gabriel-guimares Gabriel Guimarães

View all

Bits