0%

0%

Sillhouette

高中生

cn

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 12/24/2023.

My Projects

A device which can levitate a smll piece of magnet in the air by using MCU(STM32L451) and PID control loop.

Magnet Hover

Projects I Like & Follow

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

julian-fernandez Julian Fernandez

Hackaday Prize 2019

3D printed fully customizable exoskeleton arm development kit

3D Printed Exoskeleton Arm

kristjan-berce Kristjan Berce

Hackaday Prize 2019

Small magic pcb for moving miniature cars, trains or satellites :-)

Ant highway - linear motor for micro cars

A Networked set Robotic Arms, Motion platforms, sensors and more. Easily programmed with a drag and drop interface.

Evezor Robotics and Automation Platform

Hackaday Prize 2019

Spot trespassers with a neural network and transmit basic results via LoRa

LoRa + Neural Network Security System

goat-industries GOAT INDUSTRIES

Hackaday Prize 2019

We are seeing a lot of drones that have obstacle avoidance and hand control feature, is a toy or video drone. Let's learn it!

Make a Hand Control Drone

132 APA102 LED panels, 680 pixels per panel, 90,000 pixels, 300sqft, 4 Spartan 6 Mojo FPGAs

HDMI to FPGA to APA102

The 2018 Hackaday Prize

Solar charges, Open build, affordable, watch and report or community presence robot.

Watchdog Security Camera Robot

josh-starnes Josh Starnes

A project for my grandchildren to first build line-following robots then convert them to being controlled by their phones and tablets.

IP control for inexpensive line following robots

An electro-mechanical Valentine Day automaton with an 18 layer heart.

A 3D Printed Valentine For My Wife, With A Twist.

greg-zumwalt Greg Zumwalt

2021 Hackaday Prize

Combining the best of both worlds into 1 giant machine.

3D-printable 1x1x1m 5-axis machine, 3D-printer

brian-brocken Brian Brocken

A twinkly star PCB ornament

ATtiny13A PCB Star Wearable

alexandra-covor Alexandra Covor

SatIntel is an OSINT tool for Satellites. Extract satellite telemetry, receive orbital predictions. and parse TLEs

SatIntel: OSINT Tool for Satellites

angelina-tsuboi Angelina Tsuboi

Comparatively huge heat sink for Raspberry Pi sourced from old PC case

Raspberry Pi Heat Sink Recycled from PC

jeremy-cook Jeremy Cook

The 2018 Hackaday Prize

An intelligent wrist wear that has unparalleled functionality, improves user's productivity and provides better control over smartwatches.

Xtencion

chirag-mahaveer-parmar Chirag Mahaveer Parmar

Programming the Raspberry Pi Pico using Arduino IDE is quite simple nowadays. Let's setup your one to getting started

Program Raspberry Pi Pico Using Arduino IDE

lithium-ion Lithium ION

Calibrate the XY offset of your printer by printing on a piece of paper and scanning it

3D printer XY calibration using a scanner

martijn-schouten Martijn Schouten

Boulder's makerspace, Solid State Depot, is launching a high-altitude balloon in Wyoming during the Aug 21, 2017 eclipse.

Solar Eclipse High Altitude Balloon

dan-julio Dan Julio

View all

Bits