Projects VertOlive likes and follows

Sort by:

Hackaday Prize 2019

Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.

Bobble-Bot

mike-moore Mike Moore

Hackaday Prize 2019

Convert FPV racing drone into an interceptor using Raspberry Pi

Open Source Air Defense

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

Resto-Mod Dungeons and Dragons Digital Dice Tower based on a 1975 Bell & Howell IMD-202 Digital Multimeter

1978 "Heathkit" D&D Digital Dice Tower

john-anderson John Anderson

Here we will establish a connection between the HC-05 ( connected to ATmega8 ) and an android Bluetooth app to blink a LED.

Interfacing HC-05 Bluetooth module with ATmega8

electronicsforgeeks

Wireless packet radio interface for HF/VHF/UHF transceivers, using ESP32 as KISS TNC or audio relay for use with soft modems

ESP32 TNC and Audio Relay for HF/VHF Packet Radio

ryan-kinnett Ryan Kinnett

Using ESP-IDF to send raw PCM data to a fidget spinner

ESP32 Bluetooth A2DP SRC

Hackaday Prize 2019

Open Sourcing a Head Mount Wearable Headphone design as an all purpose platform for AR/VR/Audiology

An Open Source Head Wearable Platform

casual-cyborg Casual Cyborg

Light control for rooms containing both Philips Hue and Nanoleaf lights using their respective REST APIs

Raspberry Pi Hue/Nanoleaf Light Switch

tim-schonberger Tim Schonberger

USB ISP Programmer for AVR Microcontrollers based on ATtiny85

USBtinyISP AVR Programmer

stefan-wagner Stefan Wagner

24-bit stereo DAC which is specially built for Raspberry Pi boards. This R-2R DAC delivers the clear audio output with minimum configuration

24-bit Stereo Audio DAC for Raspberry Pi

dilshan-jayakody Dilshan Jayakody

This project aims to create a GPS antenna array with integrated amplifiers and RF switch on a flexible PCB for optimal GPS reception.

Flexible GPS Antenna Array for Model Rockets

eric-sims Eric Sims

This is a simple Arduino shield for Nimbelink Skywire cellular modems. They all have the same pinout, so the modems are interchangeable.

Arduino Shield for CAT M1 and NB-IoT Modems

nootropic-design nootropic design

Bowie at Supercon '18! Join us to use the robot to clean up the park, then perform environmental sensor data analysis

Supercon: Environmental Robotics BioBlitz!

very clever space and code optimized cpu

lcpu - One page (48 lines) myhdl hardware cpu

Actually a kind of "Pre-exposure prophylaxis (PrEP)", breathing you own filtered air might help you avoid getting COVID-19

DIY PPE for COVID-19 infection avoidance

Bladecenter Raspberry PI [On Progress]

Raspberry PI Bladecenter

douglas-esteves Douglas Esteves

This project adapts a AM/FM radio receiver to a private Internet stream. It also provides various TiVo-esque features.

Radio-to-Internet Streamer

The module is supposed to handle power management, control peripheral devices and in addition add GSM and GPS functionalities

Raspberry Pi IOT module

madivak madivak

Hackaday Prize 2020

A weather and energy monitory system over Wi-Fi

Weather and Energy Monitory system using IoT

anas-raza-khan Anas Raza Khan

ORB1T V19.0 is designed for those who develop IoT projects. This development board includes all sensors and base parts, no soldering needed

IoT DevKit (All-in-one) - ORB1T V19.0 ALPHA

salvatore-raccardi Salvatore Raccardi