Projects Wouter Minjauw likes and follows

Sort by:

The 2017 Hackaday Prize

Miniature VT100 with all the bells and whistles

diy-VT100 - A Miniature hardware terminal

kuldeep-singh-dhaka Kuldeep Singh Dhaka

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

The 2018 Hackaday Prize

Chapter 1 : Raspberry Pi Zero W Stepper Motor Module Balancing Robot and 3d Printer - CNC Machine

Raspberry PI Module for Robotics Mythololgy (1)

reginald-sourn Reginald Sourn

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

Project of metal 3D-printer for printing unique metal parts, by using welding wire, induction heating and other physics)))

Metal 3D-printer based on induction heating...

sergey-r Sergey R.

Open-source design for a 3d printer that can print metal at a low cost.

FDM 3D Metal Printer

132 APA102 LED panels, 680 pixels per panel, 90,000 pixels, 300sqft, 4 Spartan 6 Mojo FPGAs

HDMI to FPGA to APA102

The 2020 HDP Dream Teams are participating in a two month engineering sprint to address their nonprofit partner. Follow their journey here.

2020 HDP Dream Team: UCPLA

supplyframe-designlab Supplyframe DesignLab

Wireless packet radio interface for HF/VHF/UHF transceivers, using ESP32 as KISS TNC or audio relay for use with soft modems

ESP32 TNC and Audio Relay for HF/VHF Packet Radio

ryan-kinnett Ryan Kinnett

This is my project page for my new home brew computer, a multi-processor 63c09 and AVR SBC.

HB63C09M - 10x10 HD63C09 Based SBC

dave-collins Dave Collins

Hard to say the price/performance of desktop raspbian system YouTube video performance. Yet playable and good to go.

YouTube on Raspberry pi 4 with 8GB RAM

lithium-ion Lithium ION

Part of a professional RDS radio project

RDS FM radio

Easily extendable data logging platform with STM32F103RBTx, WiFi, microSD storage, LCD with four buttons, UART, and pulse counters.

Hardware Data Logger

robert-gawron Robert Gawron

How to make a relatively simple All band DSP Radio Receiver with a color touch display which is based on the Si47xx series chip.

DIY Si47xx All Band DSP Radio with 2.8 inch touch

mircemk mircemk

Via RYLR998 LoRa module and Arduino Nano, create a two-way radio (transceiver) w/ a 4x4 keypad to transmit and receive text messages.

Iron Man Walkie-Talkie (Two-Way Radio) w/ LoRa

kutluhan-aktar Kutluhan Aktar

A Raspberry Pi VPN WiFi Router that you can manage from any smartphone

PiFi - Raspberry Pi VPN Router

5V daisy chained neon bulbs. For glowing neon lovers.

Neon Pixels

A needed update to an older project.

A Slim 10x 100MHz-10MHz-1MHz Differential Probe

bud-bennett Bud Bennett

Single-GPIO FM transmitter: ESP32’s APLL + I²S MCLK spits a clean 100 MHz carrier—Rickrolls any nearby radio with just code + a wire!

ESP32 FM Transmitter using GPIO

alessandro-dalterio Alessandro D'Alterio

This project is a short write up of an ultrasonic directional speaker I created. It utilizes a 555 timer to generate a 40khz modulated signa

Ultrasonic directional speaker

steve-hernandez Steve Hernandez

<1.5µA with consistent operation down to 1.81V

Yet another ultra low power LED

stephan-walter Stephan Walter